2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers
ECG signal Amplifier in PCB
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 7
- Pads
- 26
- Tracks, vias
- 59, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Apr 2019
- Updated
- 19 Apr 2019
Overview
Amp is an open-source printed circuit board by JaredMoca, from the JaredMoca/Amp repository on GitHub. It is a 2-layer board with 12 parts on 7 nets, routed with 59 tracks and 0 vias.
It is built around the MCP6032-E/SN. Its parts include 4 resistors, 3 connectors, 2 capacitors and 1 IC. It belongs with the audio and music boards of this library.
Main components
1Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02 | Connectors_JST:JST_XH_S02B-XH-A_02x2.50mm_Angled | J1, J2, J3 |
| 2 | 100k | Resistors_SMD:R_1206_HandSoldering | R1, R2 |
| 1 | 0.1μF | Capacitors_SMD:C_1206_HandSoldering | C1 |
| 1 | 100pF | Capacitors_SMD:C_1206_HandSoldering | C2 |
| 1 | 500 | Resistors_SMD:R_1206_HandSoldering | R3 |
| 1 | 5k | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | GND | Kardia:Kardia | G*** |
| 1 | MCP6032 | mcp6032_SOIC:SOIC127P600X175-8N | U1 |
| 1 | names | names:names | n*** |
Questions
What parts does the Amp use?
12 parts, built around the MCP6032-E/SN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp KiCad files?
From the JaredMoca/Amp repository on GitHub, at the commit this page was made from: the board is Amp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp design in my own project?
Its repository states no licence, so its author keeps all rights: ask JaredMoca before reusing the design.
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696