

KiCad FOC ESC
Universial Motor
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 116
- Pads
- 369
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 25 May 2026
- Updated
- 4 Sep 2026
Overview
KiCad FOC ESC is an open-source printed circuit board by janrenegradwohl, from the janrenegradwohl/PCB_AxialMotor repository on GitHub, published under the MIT licence. It is a 6-layer board with 79 parts on 116 nets.
It is built around the TSC1801BILT, MA702GQ-P and MT6701CT-STD, with the REF2030AIDDCR, ZLDO1117QKTC and WS2812B-2020 among its other parts. Its parts include 33 capacitors, 11 resistors, 10 ICs, 6 transistors and 4 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
9TSC1801BILT
SOT-23-6-40℃~+125℃ 100dB 14V/us 2.1MHz 200uV 20V/V 2V~5.5V 5uV/℃ 63mA、70mA 9nV/√Hz@10kHz、50nV/√Hz@100Hz、170nV/√Hz@10Hz Low-side detection ±6V SOT-23-6 Current Sense Amplifiers ROHSSTMicroelectronicsCurrent Sense AmplifiersMA702GQ-P
QFN-16-40℃~+125℃ 11.7mA 12bit 256 30mT 3V~3.6V 60000rpm PWM、SPI、ABZ、SSI QFN-16 Magnetic Angle Sensors ROHSMonolithic Power SystemsMagnetic Angle SensorsMT6701CT-STD
SOP-8-40℃~+125℃ 0°~360° 1.75mm 10mA 3.3V~5V 3.9mm 5mm I2C、SSI Magnetic rotary position sensor No Programmable transmission、Zero position programming、Multi-axis magnetic field detection SOP-8 Position Sensors ROHSNOVOSENSEPosition SensorsREF2030AIDDCR
SOT-23-5-40℃~+125℃@(Ta) 12ppmp-p 20mA 3.02V~5.5V 460uA 8ppm/℃ Fixed Series ±0.05% SOT-23-5 Voltage Reference ROHSTexas InstrumentsVoltage ReferenceZLDO1117QKTC
TO-252-40℃~+125℃@(Tj) 1.2V@(1A) 1.2V~5V 10mA 18V 1A 80dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)PMR25HZPFV1L00
12101W 1mΩ Current Sense Resistor ±1% ±100ppm/℃ 1210 Current Sense Resistors / Shunt Resistors ROHSROHM SemiconductorCurrent Sense Resistors / Shunt ResistorsASDDV-16.000MHZ-LR-T
SMD2520-4P-40℃~+85℃ 1.6V~3.6V 16MHz 3mA HCMOS、LVCMOS SMD2520-4P Crystal Oscillators ROHSAbraconCrystal OscillatorsMPZ1608Y600BTA00
1608-55℃~+125℃ 1 1A 30mΩ 60Ω@100MHz ±25% 1608 Ferrite Beads ROHSTDKFerrite Beads
README
README.mdBall Bearing: 6706-2RS (inner: 30mm | outer: 37mm) Stator: 14 Poles | 9 Slots
mechanical requirements:
- it has to be machineable on manual late
- as few parts as possible (I will make multiple motors)
- no winding (PCB stator)
electrical features:
- HALL Sensor for FOC-ESC (MA702 f.e.)
- build in ESC
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100nF | Capacitor_SMD:C_0402_1005Metric | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C22, C23, C24, C25 +5 |
| 6 | NTTFS5D6N08XLTAG | SamacSys_Parts:NVTFS007N08HLTAG | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5, NT6 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H4, H5, H6 |
| 4 | WS2812B-2020 | CustomFootprintsJan:XL-1515RGBC-2812B | D1, D2, D3, D4 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6, C8, C902 |
| 3 | 4.7u | SamacSys_Parts:C_1210_3225Metric_DC_LINK | C110, C116, C122 |
| 3 | 5k1 | Resistor_SMD:R_0402_1005Metric | R7, R8, R8 |
| 3 | PMR25HZPFV1L00 | SamacSys_Parts:RESC3225X67N | R4, R5, R6 |
| 3 | TSC1801BILT | SamacSys_Parts:SOT95P280X145-6N | IC2, IC3, IC4 |
| 2 | 10kR | Resistor_SMD:R_0402_1005Metric | R901, R902 |
| 2 | 60 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C903 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C103 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C901 |
| 1 | 4.7nF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C904 |
| 1 | ASDDV-16.000MHZ-LR-T | SamacSys_Parts:AbraconASDDV | Y1 |
| 1 | Conn_01x06 | SamacSys_Parts:SM04B-GHS-TB | J1 |
| 1 | DRV8320SRTVR | SamacSys_Parts:QFN50P500X500X80-33N-D | IC901 |
| 1 | MA702GQ-P | SamacSys_Parts:QFN50P300X300X100-17N-D | IC6 |
| 1 | MPZ1608Y600BTA00 | SamacSys_Parts:BEADC1608X95N | FB1 |
| 1 | MT6701CT | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Prog | SamacSys_Parts:SM06B-GHS-TB | J2 |
| 1 | REF2030AIDDCR | SamacSys_Parts:SOT95P280X110-5N | IC5 |
| 1 | STM32G473RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TCAN3414DDFR | SamacSys_Parts:INA190A2NDDFREP | IC1 |
| 1 | ZLDO1117Q | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U802 |
| 1 | — | SamacSys_Parts:GSB1C41110SSHR | J201 |
More from janrenegradwohl/PCB_AxialMotor
1- 6 layers51 × 46 mm

Similar boards
- 4 layers100.3 × 57.5 mm

Macropad
janrenegradwohl/Macropad
DIY Project, involves STM32F411 as Macropad and STM32F334 as TouchSlider, not finished yet
62 parts - 2 layers46 × 17 mm

- 4 layers21.4 × 50.4 mm

- 2 layers23.5 × 34.9 mm

Sapphire AnalogMic
ChrisHayward-dev/SapphireKicad
See the LastProduction branch for the most current revision
35 parts - 2 layers62 × 50 mm

Driver
jkirsons/stealth-controller
With 8A driver, Magnetic Sensor, Microcontroller, Two-Wire Automotive Interface
50 parts93 - 2 layers50 × 36 mm

- 2 layers23 × 23 mm

MA7xx Breakout
motionlayer/MA702-Breakout-Board
MA702 examples with PlatformIO and breakout schematics
12 parts4MIT - 4 layers79 × 91.1 mm

Questions
What parts does the KiCad FOC ESC use?
79 parts, built around the TSC1801BILT, MA702GQ-P, MT6701CT-STD and REF2030AIDDCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad FOC ESC KiCad files?
From the janrenegradwohl/PCB_AxialMotor repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad_FOC-ESC/KiCad_FOC-ESC.kicad_pcb and its schematic Hardware/KiCad_FOC-ESC/CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad FOC ESC design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).