
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Use beatsaber map files to display a lightshow on LED strips
Wiring is an open-source printed circuit board by Jangberry, from the Jangberry/BS-Lightshow repository on GitHub. It is a 2-layer board of 64 × 52 mm with 21 parts on 3 nets, routed with 160 tracks and 83 vias.
Its parts include 6 diodes, 3 resistors and 3 transistors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
This repository hosts code made to show a lightshow out of a beataber map. It currently works with ESP32 and MQTT.
I plan to make it easily movable to other platforms (there isn't so much hope for AVR boards however, the framerate I get on leds isn't satisfying)
A mod to control all this mess can be found here.
(Configure your MQTT server)
Modify MQTT-esp32.ino or usb-stm32.ino to match your LED strip (and MQTT server)
NUM_LEDS is the number of LEDs on your strip, NUM_ZONE is the number of zones you want to map on them (there is 5 of them on BS), ALIM is a pin where you can put something to cut the LEDs alimentation when they're all black (HIGH = on), LED is the data pin for the LEDs)setup
FastLED.addLeds<WS2812B, LED, GRB>(leds, NUM_LEDS) replace "WS2812B" by your LEDs model and GRB by your LEDs color order (see FastLED documentation)Setting zones, tweak the conditions to match your zone mappingclient.begin(host, 8883, net); and replace the line net.setCACert(letsEncyptCA); with net.setInsecure();const char letsEncyptCA[] value to your AC's public key pam encoded.(Create the file creditentials.h in the same directory as MQTT-esp32.ino and fill it with :)
const char *ssid = "Your WiFi SSID";
const char *pass = "Your verry secret WPA key";
const char *host = "The host name of your MQTT server";
const char *user = "Your MQTT username";
const char *mqttPass = "Duh look at the variable's name (it's your MQTT password, who guessed !)";Compile and send to your ESP32/STM
Enjoy (Either through theses scripts or by installing this mod)
Here is a playlist that expose the qualities and defaluts of this project
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D_DO-41_SOD81_P7.62mm_Horizontal | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | TO-220-3_Horizontal_TabDown | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1, Q2, Q3 |
| 2 | PinHeader_1x04_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | RGB LED, SWD |
| 1 | LQFP-32_7x7mm_P0.8mm | Package_QFP:LQFP-32_7x7mm_P0.8mm | STM32 |
| 1 | Molex_Mini-Fit_Jr_5566-20A_2x10_P4.20mm_Vertical | Connector_Molex:Molex_Mini-Fit_Jr_5566-20A_2x10_P4.20mm_Vertical | Power |
| 1 | PinHeader_1x02_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | 5V |
| 1 | PinHeader_1x03_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | LED |
| 1 | Potentiometer_Alps_RK163_Single_Horizontal | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | POT |
| 1 | Switch | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW |
| 1 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 64 × 52 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jangberry/BS-Lightshow repository on GitHub, at the commit this page was made from: the board is wiring/main/main.kicad_pcb and its schematic wiring/main/main.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Jangberry before reusing the design.