Skip to the content
2 layersCharming, the printed circuit board in 3D

Angel - a symmetrical staggered ergonomic keyboard.

Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
38
Pads
120
Tracks, vias
165, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Feb 2020
Updated
27 Jan 2021

Overview

Charming is an open-source printed circuit board by jamessa, from the jamessa/Angel repository on GitHub. It is a 2-layer board with 29 parts on 38 nets, routed with 165 tracks and 0 vias.

It is built around the ATMEGA328P-PU. Its parts include 7 diodes, 6 resistors, 5 capacitors, 4 switches and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Angel (2021)

Hand wired QMK is almost ready. https://github.com/qmk/qmk_firmware/pull/11501

A symmetric staggered ergonomic keyboard. a symmetric and beautiful hand wire keyboard

Idea

A slightly ergonomic keyboard that fits into 60% form factor. layout concept

Featuring

  • Staggered yet ergonmic Symmetric stagger is ergonomic

  • Maximize hand distance hand distance

  • Arrow keys are must.

  • Fitts' law is respected. Four corner keys are maximized while [you shall no call its name] is break into 3 keys. The gaint space bar is a huge waste ot thumb(s). It breaks into 1.25, 1.5, 1.25 to free it up. My favorite combination is, backspace, enter, whitespace.

  • 60% form factor which should fix your notebook perfectly. notebook

  • all keys are under 1.75u which means no stablizer is required. Period.

Cons

It's incompatible to traditioal keycaps layout. CAPS LOCK is the only 1.75u key on traditional keyboard. In Symmetric 60%, 4 is required but you can always swap into smaller keycaps at your wish.

Prior work

in the order of first appearance.

Symmetric Stagger 60% by Jesse Vincent, Keyboardio Symmetric Stagger While I wait for the Model 01 boards to come back from Shenzhen, I've been messing around with a symmetric stagger 60% layout. Before I go and get 5 PCBs made, I'd love layout feedback from folks.

Meti

SemiErgo by meti (March 2017) SemiErgo I will vote it for ANSI standard without any doubt.

Symmetric 70 hand-wire (2020) Symmetric 70

Rominronin

Katana 60 (Nov, 2017). it's a beauty. Katana 60 ps. the character in the middle is 刀 which means sword in Chinese and Japanese.

Tsuka60 - the Katana60 v2 PCB interest check (2019)

Candykeys (2020)

Katana60 v2 PCB

Next

Now I am going to handwire one to refuse my point. Stay tune.

handwire guide

You can try it on paper and let me know how to you think about Symmetric60.

References

On space bar http://xahlee.info/kbd/keyboard_problems.html

Key symbols from http://xahlee.info/comp/unicode_computing_symbols.html

Mac keyboard shortcuts https://support.apple.com/en-us/HT201236

Human Engineering the Keyboard by K. H. Eberhard Kroemer Human Factors: The Journal of the Human Factors and Ergonomics Society 1972 14: 51 DOI: 10.1177/001872087201400110

Prototyping Tips

Kicad

  • Hardware acceleration will eeschema freezes, so don't enable it. Reset settings by rm -rf ~/Library/Preferences/kicad or verisioning it.
  • Plot gerber files and drills based on JCLPCB's tutorial. Suggested naming patterns

Special thanks to Haway 梁, Jeff 邱, Justin 吳.

Parts

29
QtyValueFootprintReferences
4DDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD4, D5, D6, D7
4SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4
20.1uCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2, C3
222pfCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC4, C5
23.6VDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2, D3
25.1KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR3, R4
275Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR5, R6
11.5KResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2
1100mAFuse:Fuse_Bourns_MF-RG500F1
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
116MHzCrystal:Crystal_HC49-4H_VerticalY1
14.7uCapacitor_THT:CP_Radial_D4.0mm_P1.50mmC1
1ATmega328P-PUPackage_DIP:DIP-28_W7.62mmU1
1AVR ISPCharming:AVRISPJ1
1BootButton_Switch_THT:SW_PUSH_6mmBoot1
1LEDLED_THT:LED_D3.0mmD1
1ResetButton_Switch_THT:SW_PUSH_6mmReset1
1TYPE-CCharming:USB_C_Receptacle_HRO_TYPE-C-31-M-12USB1

More from jamessa/Angel

1
  • 2 layers270.8 × 80.8 mmCharming, the printed circuit board in 3D

    Charming

    jamessa/Angel

    Angel - a symmetrical staggered ergonomic keyboard.

    97 parts13

Similar boards

  • 2 layers68.8 × 53.6 mmZArduino, the printed circuit board in 3D

    ZArduino

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    46 parts269
  • 2 layers76.3 × 122.8 mmDiscipad pcb, the printed circuit board in 3D

    Discipad pcb

    coseyfannitutti/discipad

    17-key numpad assembled with only through hole components, including usb type-c

    63 parts221GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers247.6 × 99.2 mmRomeo pcb, the printed circuit board in 3D

    Romeo pcb

    coseyfannitutti/romeo

    Staggered 40% keyboard pcb that can be assembled with only through hole components, including USB Type-C

    138 parts148GPL-3.0
  • 2 layers90 × 140 mmDrumkid, the printed circuit board in 3D

    Drumkid

    mattybrad/drumkid

    Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.

    70 parts137
  • 2 layers238.1 × 375.5 mmFramework, the printed circuit board in 3D

    Framework

    stevennguyen/framework

    Ortholinear keyboard with a knob

    197 parts131
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers145.3 × 44.5 mmScout, the printed circuit board in 3D

    Scout

    oskitone/scout

    3D-printed, Arduino-compatible, 17-key mono synth. Squeeeee!

    48 parts114

Questions

What parts does the Charming use?

29 parts, built around the ATMEGA328P-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Charming KiCad files?

From the jamessa/Angel repository on GitHub, at the commit this page was made from: the board is Charming/Charming.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Charming design in my own project?

Its repository states no licence, so its author keeps all rights: ask jamessa before reusing the design.