2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers107.5 × 134 mm
FinaleBanger
JamesM92/FinaleBanger_PCB24 relay arduino shield
- Size
- 107.5 × 134 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 97
- Pads
- 276
- Tracks, vias
- 869, 107
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 5 Oct 2022
- Updated
- 10 Oct 2022
Overview
FinaleBanger is an open-source printed circuit board by JamesM92, from the JamesM92/FinaleBanger_PCB repository on GitHub. It is a 2-layer board of 107.5 × 134 mm with 33 parts on 97 nets, routed with 869 tracks and 107 vias.
Its parts include 19 connectors and 1 fuse. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
readme.md
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 7 | Screw_Terminal_01x08 | TerminalBlock_RND:TerminalBlock_RND_205-00051_1x08_P5.00mm_Horizontal | J1, J6, J7, J8, J9, J10, J12 |
| 4 | 8P8C | Connector_RJ:RJ45_OST_PJ012-8P8CX_Vertical | J2, J3, J4, J5 |
| 3 | Screw_Terminal_01x10 | custom:PinHeader_1x10_P5.0mm_Horizontal | J13, J14, J15 |
| 2 | Barrel_Jack_Switch | custom:Vertical-BarrelJack_54-00287 | J16, J17 |
| 1 | Arduino_Mega_jpm | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | Polyfuse | custom:THT_JUMPER | F1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_RND:TerminalBlock_RND_205-00047_1x04_P5.00mm_Horizontal | J19 |
| 1 | Screw_Terminal_01x05 | SamacSys_Parts:691311500105 | J18 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_RND:TerminalBlock_RND_205-00049_1x06_P5.00mm_Horizontal | J11 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP9 |
The 30 most common of 33 parts.
Questions
How big is the FinaleBanger PCB?
It measures 107.5 × 134 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FinaleBanger use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FinaleBanger KiCad files?
From the JamesM92/FinaleBanger_PCB repository on GitHub, at the commit this page was made from: the board is FinaleBanger.kicad_pcb and its schematic FinaleBanger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FinaleBanger design in my own project?
Its repository states no licence, so its author keeps all rights: ask JamesM92 before reusing the design.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
