
PIC Timer
cnkurzke/HelloPIC_Interrupts
Sample code for the PIC 12F1572 interrupt handling

A three-channel high-power programmable LED driver
LED driver is an open-source printed circuit board by jameshanlon, from the jameshanlon/3C-HP-LED-driver repository on GitHub, published under the MIT licence. It is a 2-layer board of 60.1 × 77.1 mm with 38 parts on 25 nets, routed with 212 tracks and 9 vias.
It is built around the PIC12F1572-E/P and MAX485ED. Its parts include 9 resistors, 6 connectors, 5 ICs, 3 diodes and 3 transistors. It belongs with the PIC boards of this library.
A three-channel high-power programmable LED driver
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | 0.1uF1, 0.1uF2, 0.1uF3, 0.1uF4, 0.1uF5 |
| 4 | Screw_Terminal_1x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | J1, J3, J4, J5 |
| 3 | 1.4K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3 |
| 3 | 10K | Resistors_SMD:R_0805_HandSoldering | R7, R8, R9 |
| 3 | 2N7002 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3 |
| 3 | 511 | Resistors_SMD:R_0805_HandSoldering | R4, R5, R6 |
| 3 | CAT4101 | TO_SOT_Packages_SMD:TO-263-5Lead | U2, U4, U5 |
| 3 | LED | LEDs:LED_0805 | D1, D2, D3 |
| 1 | MAX485 | Housings_DIP:DIP-8_W7.62mm | U3 |
| 1 | MCLR | Pin_Headers:Pin_Header_Straight_1x02 | JP1 |
| 1 | PIC Kit3 header | Pin_Headers:Pin_Header_Straight_1x06 | J2 |
| 1 | PIC12F1572 | Housings_DIP:DIP-8_W7.62mm | U1 |
| 1 | RX | Pin_Headers:Pin_Header_Straight_1x02 | JP2 |
| 1 | Screw_Terminal_1x03 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-3pol | J6 |
| 1 | TX | Pin_Headers:Pin_Header_Straight_1x02 | JP3 |
The 34 most common of 38 parts.

cnkurzke/HelloPIC_Interrupts
Sample code for the PIC 12F1572 interrupt handling

bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino



GrappleRobotics/JMS
Another alternative field management system for the FIRST Robotics Competition.

StefanKrupop/XyloShield
Shield for Arduino that hosts a RFM26W radio module and allows DMX-512 connectivity

SylvainVanIniitu/Piccolo-4C-Black
Piccolo MIDI stochastic sequencer

ChaseDurand/Pool-Pi
Hardware+software solution for controlling a Goldline/Hayward Aqualogic pool control board over WiFi via a Raspberry Pi.
It measures 60.1 × 77.1 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the PIC12F1572-E/P and MAX485ED. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jameshanlon/3C-HP-LED-driver repository on GitHub, at the commit this page was made from: the board is PCB/LED-driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).