
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Gate banner adapter-1 is an open-source printed circuit board by jamesbeldock, from the jamesbeldock/gate-banner-adapter repository on GitHub. It is a 2-layer board of 95 × 60 mm with 2 parts on 3 nets.
It belongs with the interfaces and adapters boards of this library.
This circuit board design and all associated files, schematics, and documentation (collectively, the "Design") are provided under the MIT License on a strictly "AS IS" basis, without warranty of any kind, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose, non-infringement, electrical safety, regulatory compliance, or suitability for use with any specific driveway gate controller. The Design interfaces with the output terminals of a physical, mains- or low-voltage-powered gate controller that operates heavy mechanical equipment capable of causing serious property damage, severe personal injury, or death; correct and safe use therefore requires that the user possess (i) thorough familiarity with the specific gate controller's manufacturer documentation, wiring diagrams, safety interlocks, and operating limits, (ii) competence in low-voltage and, where applicable, line-voltage electrical work, and (iii) compliance with all applicable local, state, national, and industry codes and standards (including, where relevant, UL 325, ASTM F2200, and the National Electrical Code or local equivalent). By downloading, fabricating, assembling, installing, modifying, or otherwise using the Design, you assume all risk and sole responsibility for its operation and consequences, and you agree that neither XECUTE Ventures, LLC nor James Beldock, in his capacity as managing member or individually, nor any contributor to the Design, shall have any liability whatsoever—whether in contract, tort (including negligence), strict liability, or otherwise—for any direct, indirect, incidental, special, consequential, exemplary, or punitive damages arising out of or in connection with the Design or its use, even if advised of the possibility of such damages.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1N914 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 95 × 60 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jamesbeldock/gate-banner-adapter repository on GitHub, at the commit this page was made from: the board is gate-banner-adapter-1/gate-banner-adapter-1.kicad_pcb and its schematic gate-banner-adapter-1/_restore_backup_2026-05-24T21-21-08-551/gate-banner-adapter-1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jamesbeldock before reusing the design.