

Voltmeter PCB design project for LeTourneau University CPGR4233.
- Size
- 101.5 × 50.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 101
- Pads
- 284
- Tracks, vias
- 471, 418
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Sep 2026
- Updated
- 23 Oct 2026
Overview
ADC is an open-source printed circuit board by james7x1, from the james7x1/CPGR4233-PCB-Project repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 101.5 × 50.5 mm with 74 parts on 101 nets, routed with 471 tracks and 418 vias.
It is built around the LCMXO3LF-1300C-5TG100C and 219-8MST. Its parts include 30 capacitors, 19 resistors, 10 diodes, 4 ICs and 2 switches. It belongs with the FPGA and CPLD boards of this library.
Main components
2README
README.mdCPGR4233-PCB-Project
Voltmeter PCB design project for LeTourneau University CPGR4233.
Derived from 20+ years of PCB designs created by Intro to Microcomputer Design TAs. Recent Contributors:
Rev 5 - Samuel Johnson, Allen Morrison, Joshua Allen (AJ)
Rev 4 - Samuel Johnson
Rev 3 - Jackson Miller
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C6, C7, C11, C13, C15, C17, C19, C21, C23, C25, C27, C29 +1 |
| 13 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C8, C10, C12, C14, C16, C18, C20, C22, C24, C26, C28, C30 |
| 10 | 510 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 |
| 10 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 |
| 9 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, R9 |
| 1 | 219-8MST | Button_Switch_SMD:SW_DIP_SPSTx08_Slide_6.7x21.88mm_W8.61mm_P2.54mm_LowProfile | S1 |
| 1 | 5V Input | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP1 |
| 1 | ADC0820BCWMX_NOPB | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | IC1 |
| 1 | CLK | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | EVQ-7Q201W | Button_Switch_SMD:SW_SPST_EVQQ2 | S2 |
| 1 | GND Input | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP2 |
| 1 | INITN | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | LCMXO3LF-1300C-5TG100C | Package_QFP:TQFP-100_14x14mm_P0.5mm | IC2 |
| 1 | LOGO | LOGO | G*** |
| 1 | LP38692MPX-3.3_NOPB | Package_TO_SOT_SMD:SOT-223-5 | IC3 |
| 1 | LP38692MPX-5.0_NOPB | Package_TO_SOT_SMD:SOT-223-5 | IC4 |
| 1 | PROGRAMN | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | Probe+ | TestPoint:TestPoint_THTPad_2.5x2.5mm_Drill1.2mm | TP3 |
| 1 | ~ | Package_DFN_QFN:CDFN-4_3.2x5mm_P2.54mm | Y1 |
Similar boards
- 6 layers148 × 121 mm

- 2 layers101.6 × 53.3 mm

PCB Project FA2022
EDaugh3rty/Voltage-Display-Project
This project chips were given to us and we had to design a PCB for them and program a CPLD in VHDL.
55 parts - 4 layers100 × 82.2 mm

4 Bit - Seven Seg Interface
Shaxzodm2611/4-bit-Adder-Interface-Board
A custom PCB designed to mimic the function of a CPU. Entirely made from discrete logic ICs.
128 parts - 4 layers113 × 117.8 mm

FPGA DevBoard
Benny-Chippers/Enchanted_Rocks
The dev board PCB for the MacroController project
197 partsMIT - 2 layers141.1 × 126.8 mm

Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
74 parts915 - 2 layers49 × 44 mm

Simple keeb reuser
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
74 parts253GPL-3.0 - 2 layers49 × 49 mm

OSBMS Balancer Rev1 sot323
Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system
74 parts248 - 2 layers72.4 × 72.4 mm

SerialResonantFilter
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
74 parts222
Questions
How big is the ADC PCB?
It measures 101.5 × 50.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADC use?
74 parts, built around the LCMXO3LF-1300C-5TG100C and 219-8MST. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADC KiCad files?
From the james7x1/CPGR4233-PCB-Project repository on GitHub, at the commit this page was made from: the board is ADC.kicad_pcb and its schematic ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADC design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).