2 layers
Bbesc kiCad 1stAttempt
jakeread/tesc
in-progress motor controller, towards accessible closed-loop control
59 parts16
2 layers110.5 × 82.5 mm
Bbesc kiCad
jakeread/bbesc1electronic speed controller for bldc's on-a-breadboad
- Size
- 110.5 × 82.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 66
- Pads
- 241
- Tracks, vias
- 393, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 May 2017
- Updated
- 12 Jun 2017
Overview
Bbesc kiCad is an open-source printed circuit board by jakeread, from the jakeread/bbesc repository on GitHub. It is a 2-layer board of 110.5 × 82.5 mm with 82 parts on 66 nets, routed with 393 tracks and 0 vias.
It is built around the IR2101PBF, LM324N and LM7805, with the RJ45 among its other parts. Its parts include 29 resistors, 19 connectors, 14 capacitors, 6 ICs and 6 transistors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4
IR2101PBF
PDIP-8-40℃~+125℃ 100ns 10V~20V 130mA 150ns 150uA 160ns 2 270mA 50ns Half-Bridge IGBT、MOSFET Under Voltage Protection PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drivers
LM324N
DIP-14-16V~-1.5V、1.5V~16V -40℃~+85℃ 1.5V~30V 250nA 35mA 4 50nA 600uA 7uV/℃ 80dB 9mV DIP-14 Operational Amplifier ROHSHGSEMIOperational Amplifier
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdset phasers to three
breadboard controller for brushless motors
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | CONN_01X01 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J7, J8, J10, J11, J12, J13, J14, J17, J18, J19 |
| 6 | 470R | Resistors_SMD:R_1206_HandSoldering | R1, R2, R3, R4, R5, R6 |
| 6 | 47R | Resistors_SMD:R_1206_HandSoldering | R13, R14, R15, R16, R17, R18 |
| 5 | Q_NMOS_GDS | TO-251_IPAK_Slammed:TO-251_IPAK_Vertical | Q1, Q3, Q4, Q5, Q6 |
| 4 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C4, C6, C8, C10 |
| 4 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5, J6, J15, J16 |
| 3 | .001 | R_SHUNT_3920:R_2816_HandSoldering | R9, R10, R28 |
| 3 | 0.1uF | Capacitors_SMD:C_1206_HandSoldering | C5, C7, C9 |
| 3 | 100pF | Capacitors_SMD:C_1206_HandSoldering | C12, C13, C14 |
| 3 | 12k | Resistors_SMD:R_1206_HandSoldering | R7, R8, R27 |
| 3 | 1N4001 | Diodes_SMD:D_SMA_Handsoldering | D1, D2, D3 |
| 3 | 1uF | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3 |
| 3 | 39K | Resistors_SMD:R_1206_HandSoldering | R21, R22, R23 |
| 3 | 470k | Resistors_SMD:R_1206_HandSoldering | R11, R12, R29 |
| 3 | 5K6 | Resistors_SMD:R_1206_HandSoldering | R24, R25, R26 |
| 3 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J2, J3, J4 |
| 3 | IR2101 | Housings_DIP:DIP-8_W7.62mm_Socket_LongPads | U2, U3, U4 |
| 2 | 4K7 | Resistors_SMD:R_1206_HandSoldering | R19, R20 |
| 2 | LED | LEDs:LED_1206 | D4, D5 |
| 1 | 2000uF | Capacitors_THT:CP_Radial_D16.0mm_P7.50mm | C11 |
| 1 | CONN_01X02 | Wire_Connections_Bridges:WireConnection_2.50mmDrill_LargePad | J1 |
| 1 | LM324N | Housings_DIP:DIP-14_W7.62mm_Socket_LongPads | U5 |
| 1 | LM7805 | TO_SOT_Packages_THT:TO-220_Horizontal | U6 |
| 1 | Q_NMOS_GDS | TO-251_IPAK_Vertical | Q2 |
| 1 | RJ45 | Connectors:RJ45_8 | J9 |
| 1 | teensy_3-2 | teensy_3-2_bottomLess:Teensy3.2-bottomLess | U1 |
The 79 most common of 82 parts.
Questions
How big is the Bbesc kiCad PCB?
It measures 110.5 × 82.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bbesc kiCad use?
82 parts, built around the IR2101PBF, LM324N, LM7805 and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bbesc kiCad KiCad files?
From the jakeread/bbesc repository on GitHub, at the commit this page was made from: the board is Circuit/bbesc_kiCad.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bbesc kiCad design in my own project?
Its repository states no licence, so its author keeps all rights: ask jakeread before reusing the design.
Similar boards
- 2 layers185.4 × 73.7 mm
FullInterlockingPlantCAN
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
154 parts24 - 2 layers256.5 × 172.9 mm
- 2 layers239.3 × 121.3 mm
- 2 layers165.1 × 66 mm
Selector8x16
DavidMFlynn/VideoSelector
Sets camera to monitor connections, RS-232, Extron Electronics MAV 88, PIC16F1847.
113 parts1GPL-3.0 - 2 layers200 × 330 mm
- 2 layers
- 2 layers122.6 × 52.7 mm
