

Macropad
A simon says game built on a PCB.
- Size
- 99.5 × 101.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 18
- Pads
- 64
- Tracks, vias
- 74, 4
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Jun 2026
- Updated
- 12 Jun 2026
Overview
Macropad is an open-source printed circuit board by jagmx17, from the jagmx17/simon-says repository on GitHub. It is a 2-layer board of 99.5 × 101.1 mm with 13 parts on 18 nets, routed with 74 tracks and 4 vias.
Its parts include 4 resistors, 4 diodes, 4 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
README
README.mdSimon-Says
A simon says game built on a PCB. It uses four keyboard switches and four LEDs to play. This project has helped me begin working on my foundations in PCB design.
3D Model
Schematic
PCB Design
Bill of Materials
| Quantity | Item | Cost (USD) | Link |
|---|---|---|---|
| 1 | Seeed Studio XIAO RP2040 | $4.88 | https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/102010428/14672129 |
| 1 | XIAO RP2040 Header Pins | $0.25 | https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/102010490/19176770 |
| 4 | Cherry MX Key Switches | $5.00 | https://www.digikey.com/en/products/detail/cherry-americas-llc/MX1A-C1NW/280855 |
| 4 | 120 Ohm Resistors | $0.35 | https://www.digikey.com/en/products/detail/yageo/CFR-25JB-52-120R/389 |
| 10 | Green LEDs | $0.67 | https://www.digikey.com/en/products/detail/american-bright-optoelectronics-corporation/BL-B2141Q/22486916 |
| 1 | Translucent Keycaps | $4.95 | https://www.digikey.com/en/products/detail/adafruit-industries-llc/4956/13997776 |
| 1 | PCB | $3.12 | |
| Subtotal: | $19.22 |
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | L08R5000Q1 | footprints:LEDRD254W57D500H1070 | D1, D2, D3, D4 |
| 4 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical | R1, R2, R3, R4 |
| 4 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 1 | XIAO-RP2040-DIP | footprints:XIAO-RP2040-DIP | U1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Macropad PCB?
It measures 99.5 × 101.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Macropad use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Macropad KiCad files?
From the jagmx17/simon-says repository on GitHub, at the commit this page was made from: the board is PCB/macropad.kicad_pcb and its schematic PCB/macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Macropad design in my own project?
Its repository states no licence, so its author keeps all rights: ask jagmx17 before reusing the design.