2 layers233.4 × 280 mm
2 layers65 × 30 mm
Raspberry to Caetla
JaCzekanski/Raspberry-to-Caetla5Caetla (PS1 Xplorer cartrige) interface for Raspberry
- Size
- 65 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 32
- Pads
- 134
- Tracks, vias
- 308, 13
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Oct 2019
- Updated
- 26 Apr 2020
Overview
Raspberry to Caetla is an open-source printed circuit board by JaCzekanski, from the JaCzekanski/Raspberry-to-Caetla repository on GitHub. It is a 2-layer board of 65 × 30 mm with 22 parts on 32 nets, routed with 308 tracks and 13 vias.
It is built around the 74LVC1G125 and 74HCT541D. Its parts include 6 ICs, 4 resistors, 3 capacitors and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
2
74LVC1G125
SOT-353SOT-353 Buffers, Drivers, Receivers, Transceivers ROHSWuxi I-core ElecBuffers, Drivers, Receivers, Transceivers
74HCT541D
SO-20-40℃~+125℃ 1 15ns@4.5V,50pF 160uA 4.5V~5.5V 6mA 6mA 74HCT 8 Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
README
README.mdRaspberry PI Zero to Caetla (Xplorer) interface
Adapter for Xplorer PS1 cartridges (for use with catflap4linux)
Author: Jakub Czekański
License: CC BY 4.0
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 74LVC1G125 | Package_TO_SOT_SMD:SOT-23-5 | U1, U3, U4, U5, U6 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | , , , | |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 1 | 5V_PWR | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | POWER |
| 1 | 74HCT541 | Package_SO:Infineon_PG-DSO-20-32 | U2 |
| 1 | LOGO | Mine:avatar | G*** |
| 1 | PARALLEL | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J3 |
| 1 | RASPBERRY_PI | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J2 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | UART |
Similar boards
- 4 layers110 × 110 mm
Smoothiev2-prime
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
453 parts71 - 2 layers99.1 × 49.9 mm
- 6 layers158 × 174 mm
TritonECU Main
alpauna/TritonECU
ESP32-S3 engine control unit — fuel injection, ignition timing, wideband O2 (CJ125/LSU 4.9), dashboard, and MQTT telemetry
457 parts10 - 2 layers214.6 × 123.2 mm
- 2 layers100 × 100 mm
ADAT IO x4
freeDSP/freeDSPx-ADAT-IO-x4
The freeDSPx ADAT IO x4 is a digital IO expansion board for the freeDSP family. It provides 4 Lightpipe(I2S) inputs and 4 Lightpipe outputs via single Toslink Cable.
124 parts10 - 2 layers200 × 150 mm
- 2 layers87 × 56 mm
Questions
How big is the Raspberry to Caetla PCB?
It measures 65 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Raspberry to Caetla use?
22 parts, built around the 74LVC1G125 and 74HCT541D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Raspberry to Caetla KiCad files?
From the JaCzekanski/Raspberry-to-Caetla repository on GitHub, at the commit this page was made from: the board is raspberry-to-caetla.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Raspberry to Caetla design in my own project?
Its repository states no licence, so its author keeps all rights: ask JaCzekanski before reusing the design.