2 layers20.5 × 24.8 mm
2 layers26 × 14.6 mm
Limit Sensor
jacob7395/pendulum- Size
- 26 × 14.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 4
- Pads
- 15
- Tracks, vias
- 23, 0
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 31 Mar 2016
- Updated
- 12 Oct 2016
Overview
Limit Sensor is an open-source printed circuit board by jacob7395, from the jacob7395/pendulum repository on GitHub. It is a 2-layer board of 26 × 14.6 mm with 8 parts on 4 nets, routed with 23 tracks and 0 vias.
Its parts include 2 diodes, 1 resistor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N4001 | DRM_KiCad_Library:Diode_Single_Sided | D1 |
| 1 | CONN_01X03 | DRM_KiCad_Library:Header_3W_Single_Sided | P1 |
| 1 | Hall Sensor A3144E | DRM_KiCad_Library:Hall_Sensor_3144 | IC1 |
| 1 | LED | DRM_KiCad_Library:LED_3mm_Single_Sided | D2 |
| 1 | R | DRM_KiCad_Library:Resistor_Single_Sided | R1 |
The 5 most common of 8 parts.
Questions
How big is the Limit Sensor PCB?
It measures 26 × 14.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Limit Sensor use?
8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Limit Sensor KiCad files?
From the jacob7395/pendulum repository on GitHub, at the commit this page was made from: the board is Schematics/Hall Sensor/Limit Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Limit Sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacob7395 before reusing the design.
Similar boards
- 2 layers14.4 × 10.5 mm
OSO SWAB B1-00 Sensor Watch Accelerometer
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
8 parts2.1k - 2 layers7.9 × 39.1 mm
Brain board STM32F407 SD wing it
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
8 parts1.2k - 2 layers59.9 × 25.7 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
8 parts1kGPL-3.0 - 2 layers52 × 12.6 mm
USB
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
8 parts960Apache-2.0 - 2 layers87.5 × 48.5 mm
7 input macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
8 parts915 - 2 layers36.2 × 63.1 mm
PicoMemcard pico
dangiu/PicoMemcard
Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico
8 parts694GPL-3.0 - 2 layers36 × 10 mm
PCB4-PWR BTN Rev.A
OLIMEX/DIY-LAPTOP
Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop
8 parts578Apache-2.0