2 layers40 × 20 mm
2 layers25.4 × 28.6 mm
Lab6PCB
jacksonphilion/PCB_lab6Contains the KiCad files for the Lab 6 PCB
- Size
- 25.4 × 28.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 21
- Pads
- 44
- Tracks, vias
- 55, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Oct 2024
- Updated
- 4 Oct 2024
Overview
Lab6PCB is an open-source printed circuit board by jacksonphilion, from the jacksonphilion/PCB_lab6 repository on GitHub. It is a 2-layer board of 25.4 × 28.6 mm with 13 parts on 21 nets, routed with 55 tracks and 2 vias.
Its parts include 5 resistors, 5 diodes, 2 connectors and 1 IC.
README
README.mdJackson Philion, Oct.3.2024, jphilion@g.hmc.edu
This repository contains the gerber and KiCad files to make a custom PCB for lab 6. Using the outline below, as well as the associated resources and references, I created the PCB to connect a DS1722 chip to a MikroBUS standard port. Our E155 protoboard has one such port. The DS1722 is a digital thermometer which communicates over the popular SPI interface. I elected to maintain the standard form factor of the MikroBUS standard, minus the notch, but chose to only include the silkscreen markings which I felt were most relevant.
Activity Outline: https://hmc-e155.github.io/lecture/pcb-activity/
Tutorials Referenced: https://www.youtube.com/playlist?list=PL3bNyZYHcRSUhUXUt51W6nKvxx2ORvUQB
https://www.youtube.com/watch?v=3FGNw28xBr0
MikroBUS Standard: https://download.mikroe.com/documents/standards/mikrobus/mikrobus-standard-specification-v200.pdf
SOIC 8 Standard: https://www.centralsemi.com/docs/PDD/SOIC-8PD.PDF
DS1722 Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1722.pdf \
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
| 5 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | ~ | Package_SO:DS1722_SOIC_8_Custom | U1 |
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Lab6PCB PCB?
It measures 25.4 × 28.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Lab6PCB use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lab6PCB KiCad files?
From the jacksonphilion/PCB_lab6 repository on GitHub, at the commit this page was made from: the board is kicadProject/lab6PCB.kicad_pcb and its schematic kicadProject/lab6PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lab6PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacksonphilion before reusing the design.