
Reform2-keyboard3
jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

This is the main repository for the MNT Reform open source laptop.
Reform2-oled is an open-source printed circuit board by jackhumbert, from the jackhumbert/reform repository on GitHub. It is a 2-layer board of 80 × 12 mm with 14 parts on 13 nets, routed with 77 tracks and 27 vias.
Its parts include 7 capacitors, 2 resistors, 1 IC and 1 connector. It belongs with the lEDs and displays boards of this library.
This is the main repository for the MNT Reform open source laptop.
For details, check out Finishing Reform and related articles.

Copyright 2018-2020 MNT Research GmbH.
The following licenses are used in the project, unless specified differently in a particular subfolder:
The "MNT" and "MNT REFORM" logos are trademarks of MNT Research GmbH. You may not use these in derived works. The reason for this is that we cannot be responsible for regulatory issues with derived boards and we cannot support them. If someone sees an MNT brand on a product, it has to be clear that it comes from MNT Research and not from a third party.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C5, C6, C7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4 |
| 1 | 330k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
| 1 | AUX | Connector_FFC-FPC:Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal | J1 |
| 1 | BADGE | footprints-oled:reform2-oled-badge | GFX2 |
| 1 | MH1 | MountingHole:MountingHole_2.2mm_M2_Pad | H1 |
| 1 | MH2 | MountingHole:MountingHole_2.2mm_M2_Pad | H2 |
| 1 | SSD1306 | KiCad-SSD1306_OLED-0:SSD1306_OLED-0.91-128x32 | U1 |

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 80 × 12 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jackhumbert/reform repository on GitHub, at the commit this page was made from: the board is reform2-oled-pcb/reform2-oled.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jackhumbert before reusing the design.