2 layers89 × 100 mm
Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388
2 layers276.2 × 85.7 mm
65-keyboard pcb
jackesche/65-keyboard-pcbActually not a 65% keyboard
- Size
- 276.2 × 85.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 115
- Nets
- 90
- Pads
- 442
- Tracks, vias
- 216, 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Sep 2020
- Updated
- 22 Nov 2020
Overview
65-keyboard pcb is an open-source printed circuit board by jackesche, from the jackesche/65-keyboard-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 276.2 × 85.7 mm with 115 parts on 90 nets, routed with 216 tracks and 2 vias.
It is built around the ATMEGA32U4. Its parts include 48 diodes, 8 capacitors, 6 resistors, 1 IC and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.md65-keyboard-pcb
A 65% ANSI-only keyboard pcb
Parts
115| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 22p | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D16, D17, D18, D19, D20, D21, D22, D23, D24 +32 |
| 40 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX17, MX18, MX19, MX20, MX21, MX22, MX23, MX24, MX25 +24 |
| 5 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX16, MX41, MX45, MX47, MX54 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6, C7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R6 |
| 2 | 22 ohm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-NoLED | MX27, MX31 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | ATMEGA32U4 | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | MX-NoLED | MX_Only:MXOnly-6.25U-ReversedStabilizers-NoLED | MX50 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB4085-GF-A_REVA | USB4085-GF-A_REVA:GCT_USB4085-GF-A_REVA | J1 |
| 1 | XTAL_GND | Crystal:Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering | X1 |
Questions
How big is the 65-keyboard pcb PCB?
It measures 276.2 × 85.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 65-keyboard pcb use?
115 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 65-keyboard pcb KiCad files?
From the jackesche/65-keyboard-pcb repository on GitHub, at the commit this page was made from: the board is 65-keyboard-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 65-keyboard pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers22.9 × 36.7 mm
Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm
- 2 layers114.9 × 77 mm
- 2 layers444.1 × 151.2 mm
Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm
- 2 layers373.2 × 131.8 mm
- 2 layers17.8 × 33 mm
