
Hydromisc
hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.

Drone is an open-source printed circuit board by JA1YNX, from the JA1YNX/Drone2024_pcb repository on GitHub. It is a 2-layer board of 63.5 × 63.5 mm with 29 parts on 46 nets, routed with 150 tracks and 17 vias.
It is built around the ESP32-WROOM-32E. Its parts include 12 connectors, 6 resistors, 6 diodes, 1 IC and 1 transistor. It belongs with the robots and motor control boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2, J4, J5, J7, J8 |
| 6 | LED | LED_THT:LED_D3.0mm_Clear | D1, D2, D3, D4, D5, D6 |
| 6 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3, J6, J9 |
| 2 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J11, J12 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2 |
| 1 | Conn_02x04_Counter_Clockwise | USER:BNO055 | J10 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U2 |
| 1 | NPN | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | SW_DPST_x2 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | SW1 |

hydromisc/hydromisc
Open hardware to measure EC and pH, drive pumps, and otherwise manage a mid-size hydroponic grow over Wi-Fi.

QuantumVillage/UncutGem
A prototype Full Stack fully Open Source NV Center Diamond Magnetometer


SRA-VJTI/sra-board-hardware-design
ESP32-based Development Board for Robotics and Embedded Applications

ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.

Brobiwann/ESP-spider
The ESP-Spider is a quadruped robot inspired by the miniKame (https://github.com/JavierIH/miniKame) . Like the miniKame, it uses sinusoidal functions to control servo positions, but the design and code were developed…


kbx81/kbxLEDController-16ch
kbx's 16-channel ESP-32 Powered LED Strip Controller
It measures 63.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ESP32-WROOM-32E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JA1YNX/Drone2024_pcb repository on GitHub, at the commit this page was made from: the board is Drone.kicad_pcb and its schematic Drone.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JA1YNX before reusing the design.