
ScartPCB
screwbreaker/ScartPCB
A little PCB to buld a SCART cable for console and old computers

A rpi compute module (or CMIO) MIPI DSI adapter for the iPhone 4 lcd.
Rpi dsi iphone4 is an open-source printed circuit board by ixoo, from the ixoo/rpi-dsi-iphone4 repository on GitHub. It is a 4-layer board of 41.9 × 29.2 mm with 27 parts on 30 nets, routed with 1,388 tracks and 39 vias.
It is built around the TPS61040DBVRG. Its parts include 8 capacitors, 7 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the lEDs and displays boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R5, R6 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C5, C8 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 2 | BAS170W | Diode_SMD:D_SOD-323 | D1, D2 |
| 1 | 220nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 22uH | custom-components:IND_PANASONIC_ELLVEG | L1 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 4.7uH | custom-components:IND_PANASONIC_ELLVEG | L2 |
| 1 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | LV52204 | custom-components:UDFN6_2X2_065P | U1 |
| 1 | Molex 54548-2271 | custom-components:FPC_22 | CN2 |
| 1 | TPS61040DBVR | digikey-footprints:SOT-753 | U2 |
| 1 | iP4 | custom-components:IPHONE4_LCD_CONN | CN1 |

screwbreaker/ScartPCB
A little PCB to buld a SCART cable for console and old computers


Harshavar8jdm/tps61040dbvr-boost-converter-module
A compact (18 mm × 14 mm) 2-layer DC-DC step-up converter module designed around the Texas Instruments TPS61040 boost switching regulator.


tyevco/dial-me-spinner
A Bluetooth dial spinner about 70 mm across, built on the nRF52840. A heavy, balanced stainless flywheel ring spins around a stationary centre that holds a colour OLED and a ring of 48 addressable RGB LEDs.

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark


pms67/HadesFCS
Complete flight control system designed from scratch. Hardware designed with KiCad.
It measures 41.9 × 29.2 mm and has 4 copper layers, 1.6 mm thick.
27 parts, built around the TPS61040DBVRG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ixoo/rpi-dsi-iphone4 repository on GitHub, at the commit this page was made from: the board is rpi-dsi-iphone4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ixoo before reusing the design.