

Oximeter
A pulse oximeter design that includes PCB design in KiCad, Arduino IDE code (to be used with STM32), and a simple Android app to display data trasmitted via Bluetooth.
- Size
- 60 × 109.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 105
- Pads
- 286
- Tracks, vias
- 472, 78
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jul 2026
- Updated
- 14 Jul 2026
Overview
Oximeter is an open-source printed circuit board by Iva0108, from the Iva0108/Pulse-Oximeter repository on GitHub. It is a 2-layer board of 60 × 109.7 mm with 66 parts on 105 nets, routed with 472 tracks and 78 vias.
It is built around the HC-05, AMS1117-1.8 and AMS1117-3.3, with the DS3231S#, TP4056-42-ESOP8 and 3034TR among its other parts. Its parts include 24 capacitors, 18 resistors, 7 ICs, 4 diodes and 3 connectors. It belongs with the radio and wireless and lEDs and displays boards and the STM32 boards of this library.
Main components
7HC-05
Bluetooth to Serial Port ModuleGENERICUncategorisedAMS1117-1.8
SOT-223-40℃~+125℃@(Tj) 0.003%Vout 1 1.3V@(1A) 1.8V 15V 1A 72dB@(120Hz) Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDS3231S#
RTC, I²C, ±3.5ppm, SOIC16Maxim Integrated (Analog Devices)UncategorisedTP4056-42-ESOP8
ESOP-8-40℃~+85℃ 1 1A 2uA 4.2V 4V~8V Charging IC Lithium Battery Support ESOP-8 Battery Management ROHSTOPPOWERBattery Management3034TR
-- Battery Snap ROHSKeystone ElectronicsBatteryConnectorB2B-PH-K
UncategorisedJST
README
README.mdA pulse oximeter project that consists of hardware, firmware, and software implementation. This project is provided for educational and research purposes only, and is NOT authorized for medical use. This project presents a portable pulse oximeter capable of measuring blood oxygen saturation (SpO₂) and heart rate (BPM) using the MAX30102 sensor. The measured values are displayed on an OLED screen and transmitted wirelessly to an Android application via an HC-05 Bluetooth module.
Features:
- Measurement of SpO₂ (oxygen saturation)
- Measurement of heart rate (BPM)
- Real-time display on SSD1306 OLED (128×64)
- Wireless Bluetooth communication
- Custom KiCad PCB design
- Android application for data visualization
- Powered by a 3.7 V Li-Po battery with charging circuitry
Building the Project:
Android App The Android application was developed in Java using Android Studio. It connects to the HC-05 module via Bluetooth SPP and displays the received BPM and SpO₂ values in real time. Expected data format: BPM:72,SPO2:98
- Open Oximeter_App/PulseOxApp in Android Studio.
- Allow Gradle synchronization.
- Build and run the application.
Firmware The firmware was developed in the Arduino IDE for the STM32 Blue Pill. It uses the MAX30105 library to acquire sensor data, calculate heart rate and oxygen saturation, and transmit the values over Bluetooth.
- Open BT_PulseOximeter.ino in the Arduino IDE.
- Select the STM32 board package (if not already installed, install it via Boards Manager).
- Upload the firmware using ST-Link. It might be necessary to use ST Programmer for flashing instead of doing it directly in Arduino IDE, in which case you will need to select either a .bin or .elf file to do so.
PCB The custom PCB was designed in KiCad as a two-layer board with separate schematic sheets for power supply, MCU, sensor module, HC-05 Bluetooth module and OLED display.
- Open Oximeter.kicad_pro in KiCad.
- Use the PCB editor or 3D viewer to inspect the design.
Hardware & Firmware:
Android App:
PCB:
Case:
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C15, C16, C17, C18, C19, C21, C22, C23 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R6, R7, R9, R11, R12 |
| 6 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C7, C12, C20, C25 |
| 5 | 4.7k | Resistor_SMD:R_0805_2012Metric | R5, R10, R14, R15, R16 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C24 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | 22p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8, C10 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C5 |
| 2 | 4.7u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C13 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R17, R18 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 2130830005 | 2130830005:MOLEX_2130830005 | J4 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 3034TR | 3034TR:BAT_3034TR | BT1 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | AMS1117-1.8 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | B2B-PH-K | B2B-PH-K:JST_B2B-PH-K | J2 |
| 1 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | OLED_display1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | DS3231 | DS3231:SO16W | IC2 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D3 |
| 1 | HC-05 | HC-05:XCVR_HC-05 | U6 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm | D1 |
| 1 | LED | LED_THT:LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_Clear | D2 |
| 1 | MAX30102EFD_T | MAX30102EFD_T:XDCR_MAX30101EFD_ | U5 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW3 |
| 1 | SW_SPDT | Button_Switch_THT:SW_NKK_BB15AH | SW1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U3 |
Similar boards
- 2 layers76.7 × 35.3 mm

- 4 layers109.8 × 59.1 mm

- 2 layers142 × 20 mm

DeskController
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
69 parts94BSD-3-Clause - 2 layers98 × 37.8 mm

RC Car Remote Board
cjg-1/FPV-RC-CAR
A wireless FPV control system for RC vehicles featuring real-time video transmission and custom embedded power management. Enables immersive first-person vehicle teleoperation with low-latency wireless architecture.
10 parts2 - 4 layers65 × 56 mm

- 2 layers123 × 64.5 mm

Casco EEG Kicad
lolobernardi/eeg-headset-project
Proyecto para el desarrollo de un casco EEG inalámbrico y portátil
125 parts - 4 layers42 × 42 mm

Exa tim
hasenbanck/exa_tim
EXA_tim is a wrist watch PCB with GNSS time synchronization and e-paper display
53 parts6 - 4 layers20 × 61.5 mm

Ble door sensor
gumulka/ble_door_sensor
A simple project to observe a window or door is open/closed. It works like most other sensors as well. A magnet has to get attached to the door and if it comes near the board, it is detected and the state of the window…
41 parts2Apache-2.0
Questions
How big is the Oximeter PCB?
It measures 60 × 109.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Oximeter use?
66 parts, built around the HC-05, AMS1117-1.8, AMS1117-3.3 and DS3231S#. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Oximeter KiCad files?
From the Iva0108/Pulse-Oximeter repository on GitHub, at the commit this page was made from: the board is Oximeter_PCB/Oximeter.kicad_pcb and its schematic OximeterCase/OximeterCase/Oximeter/Oximeter/Bluetooth.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Oximeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Iva0108 before reusing the design.