Skip to the content
2 layers113.1 × 88.3 mmChocowi36, the printed circuit board in 3D

Custom keyboard with Choc-spaced 3x5 Corne layout, diodeless, nice!nano compatible, dual-side PCB with support for both hotswap and soldered switches.

Size
113.1 × 88.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
29
Nets
26
Pads
310
Tracks, vias
372, 8
Pours
181
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
2 Sep 2024
Updated
18 Nov 2024

Overview

Chocowi36 is an open-source printed circuit board by itsdmd, from the itsdmd/chocowi36 repository on GitHub. It is a 2-layer board of 113.1 × 88.3 mm with 29 parts on 26 nets, routed with 372 tracks and 8 vias.

Its parts include 18 switches and 2 ICs. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

chocowi36

A 36-key, low profile, wireless, split keyboard. Derived from davidphilipbarr/Choc-Spaced-Corne, with the original design based on Foostan's Corne.

Finished build

chocowi36 PCB Top - JLCPCB renderchocowi36 PCB Bottom - JLCPCB renderchocowi36 PCB - KiCad render

Changes

  • The PCB shape, dimensions and mounting holes' position are modified to personal preferences.
  • Battery onboard connector is replaced with through hole pads for better flexibility. Power switch is connected to the positive terminal of the battery instead of ground.
  • The outermost thumb key has been changed to a 1u key, and the splayed angle of the thumb cluster has been increased to 15 degrees.
  • Allow the nice!nano to be mounted with the USB port facing down for both halves for better MCB protection.
  • Support both hotswap and soldered switches. Only Choc v1 switches are supported.

Case

The case for the keyboard can be found here: OnShape document

Finished build - Folded

chocowi36 Case - OnShape renderchocowi36 Case Folded - OnShape render

This case features a 5.5x2.1 DC power jack for connecting to a detachable Li-Ion battery enclosure. The provided enclosure is designed for storing a 21700 battery with a protection PCB attached to it. This enclosure can act as a tenting mechanism, or for locking the two keyboard halves in place when folded for travelling. Most parameters can be slightly adjust without breaking the whole thing. The screw holes are 3.0mm in diameter (for housing M2 heat inserts), and default tolerance is 0.3-0.5mm.

Firmware

ZMK shield definition of chocowi36 can be obtained here. Please note that the definition files are written for the keyboard to be used with a third nice!nano as the central/dongle.

The provided files should only act as the boilerplate, please adjust the configurations according to your personal needs and preferences. You can create your own repo using the template and make further modifications.

Notes

There are two versions of the PCB, one with straight traces and one with curved traces. There are no major differences between the two, mostly just aesthetics.

Disclaimer

This is a personal project and not affiliated with the original authors. The gerber file has been checked against JLCPCB's DFM checker and no critical error was found. All files (including firmware) are provided as-is, without any warranty or support.

Parts

29
QtyValueFootprintReferences
18SW_Pushitsdmd:KS_Socket_Choc_optional_reversibleSW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +2
4MountingHoleitsdmd:MountingHole_2.2mm_M2H1, H2, H3, H4
2SW_Pushitsdmd:SW-T_SPST_TL3342SW_RST1, SW_RST2
2SW_SPDTitsdmd:SW-S_MSK-12C02SW_POWER1, SW_POWER2
2nice!nanoitsdmd:MCB_nice-nano_flipU1, U2
1Battery_Cellitsdmd:Battery_Pads-dual-sideBT1

More from itsdmd/chocowi36

1
  • 2 layers113 × 88.3 mmPlate, the printed circuit board in 3D

    Plate

    itsdmd/chocowi36

    Custom keyboard with Choc-spaced 3x5 Corne layout, diodeless, nice!nano compatible, dual-side PCB with support for both hotswap and soldered switches.

    27 parts5

Similar boards

  • 2 layers52.3 × 10.5 mmStackLink, the printed circuit board in 3D

    StackLink

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    29 parts5.1kGPL-3.0
  • 2 layers56 × 20 mmHallEffectXY Endstop, the printed circuit board in 3D

    HallEffectXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    29 parts1.1kGPL-3.0
  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    29 parts1kGPL-3.0
  • 2 layers16.8 × 13.6 mmE Fidget Lite, the printed circuit board in 3D

    E Fidget Lite

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    29 parts915
  • 2 layers85 × 12.5 mmTERES PCB3-TOUCH BTN Rev.A, the printed circuit board in 3D

    TERES PCB3-TOUCH BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    29 parts578Apache-2.0
  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers80 × 55 mmGB CARTPP XC, the printed circuit board in 3D

    GB CARTPP XC

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    29 parts379CC-BY-4.0
  • 2 layers55 × 58 mmProto ads bee mcu board, the printed circuit board in 3D

    Proto ads bee mcu board

    PantsForBirds/adsbee

    Open Source Embedded ADS-B Receiver

    29 parts344GPL-3.0

Questions

How big is the Chocowi36 PCB?

It measures 113.1 × 88.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Chocowi36 use?

29 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chocowi36 KiCad files?

From the itsdmd/chocowi36 repository on GitHub, at the commit this page was made from: the board is pcb/chocowi36.kicad_pcb and its schematic pcb/chocowi36-plate.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chocowi36 design in my own project?

Its repository states no licence, so its author keeps all rights: ask itsdmd before reusing the design.