2 layers26 × 22 mm
2 layers9.5 × 2 mm
FrogClamp
It3rate/CadModelsbackup and transfer of cad models
- Size
- 9.5 × 2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 54
- Pads
- 101
- Tracks, vias
- 35, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Apr 2025
- Updated
- 12 Jul 2025
Overview
FrogClamp is an open-source printed circuit board by It3rate, from the It3rate/CadModels repository on GitHub. It is a 2-layer board of 9.5 × 2 mm with 17 parts on 54 nets, routed with 35 tracks and 0 vias.
It is built around the QM6006D-VB. Its parts include 4 resistors, 2 diodes, 2 transistors and 1 switch.
Main components
1Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R2, R3 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R1, R4 |
| 2 | 1N5407 | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 2 | QM6006D | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2 |
| 1 | Battery_Cell | AARobin:Lipo Battery | BT1 |
| 1 | Buzzer | Crystal:Resonator-2Pin_W6.0mm_H3.0mm | BZ1 |
| 1 | Motor Pump | AARobin:miniPump_1.2 | M1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPST_B3U-1100P | SW1 |
| 1 | Solenoid Valve | AARobin:SolenoidValve_9.0 | M2 |
| 1 | ~ | AARobin:BME280_brd | Bme280_brd1 |
| 1 | ~ | AARobin:nRF24L01_Breakout | NRF_Board1 |
| 1 | ~ | AARobin:BlackPill | BlackPill1 |
| 1 | ~ | AARobin:TP4056-18650 | RD_TP4046Bat_brd1 |
More from It3rate/CadModels
1Similar boards
- 2 layers
- 2 layers87 × 115 mm
- 2 layers65.3 × 39.6 mm
- 2 layers100 × 30 mm
INPUT
jojo20000-basic/Logic-for-Beginners
Design Elements for a student box to learn the use of logic gates.
54 parts - 4 layers101.6 × 101.6 mm
Simple Polaroid Trigger
JWehle/polaroid-trigger
Automated trigger board for a polaroid SX-70 type camera.
80 partsApache-2.0 - 2 layers100 × 83.3 mm
- 2 layers93.4 × 87.4 mm
- 2 layers89.3 × 68 mm
Questions
How big is the FrogClamp PCB?
It measures 9.5 × 2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FrogClamp use?
17 parts, built around the QM6006D-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FrogClamp KiCad files?
From the It3rate/CadModels repository on GitHub, at the commit this page was made from: the board is frogClamp/circuits/frogClamp/frogClamp.kicad_pcb and its schematic frogClamp/circuits/frogClamp/frogClamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FrogClamp design in my own project?
Its repository states no licence, so its author keeps all rights: ask It3rate before reusing the design.