

EAGLE MK1-revB
Building custom flight computers
- Size
- 50 × 55 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 130
- Pads
- 276
- Tracks, vias
- 296, 216
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Oct 2020
- Updated
- 7 Nov 2026
Overview
EAGLE MK1-revB is an open-source printed circuit board by ISSUIUC, from the ISSUIUC/ISS-PCB repository on GitHub. It is a 4-layer board of 50 × 55 mm with 54 parts on 130 nets, routed with 296 tracks and 216 vias.
It is built around the ECMF02-2AMX6, ESP32-P4 and USB4105-GF-A. Its parts include 16 resistors, 13 capacitors, 5 ICs, 5 connectors and 4 diodes. It belongs with the sensors and measurement boards and the ESP32, RISC-V and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3ECMF02-2AMX6
UFQFN-6(1.5x1.7)-40℃~+85℃ 2 2.5Ω 200mA UFQFN-6(1.5x1.7) Common Mode Filters ROHSSTMicroelectronicsCommon Mode FiltersESP32-P4
QFN104-10X10QFN104-10X10 New Arrivals ROHSEspressif SystemsUncategorisedUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
boards/Feather_Duo/README.mdFeather Duo
The Feather Duo radio receiver was conceived to optimize communication with MIDAS and simplify the team’s ground station setup, including two LoRa radios for concurrent reception from both stages and software support for increased data rates. It succeeds the Adafruit Feather M0 RFM96 as the team’s primary ground station receiver.
Read more about the Feather Duo, MIDAS and the surrounding avionics systems in the MIDAS MK2 Report.
Schematics
Printable PDF schematics and layouts for the Feather Duo can be found in the PDFs and images folders.
Photos
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C11, C13 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R6, R7, R9, R16 |
| 4 | 22uF | Capacitor_SMD:C_0603_1608Metric | C4, C8, C9, C10 |
| 4 | 470 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C5, C12 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2, J5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | SW1, SW2 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 10pF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.7nF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | BLUE LED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J3 |
| 1 | ECMF02-2AMX6 | Package_DFN_QFN:ST_UQFN-6L_1.5x1.7mm_P0.5mm | U1 |
| 1 | ESP32-P4 | MCU_ESP32:ESP32-P4-Module | U2 |
| 1 | GREEN LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | INA745x | Package_VQFN:VQFN-REL0014B | U4 |
| 1 | LOGO | Logos_ISS:ISS_LOGOV2_tiny | G*** |
| 1 | LOGO | Memes:Eagle | G*** |
| 1 | LR2021 | RF_Module_NiceRF:LR2021 | U5 |
| 1 | ORANGE LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SMA | Connector_Coaxial:SMA_Molex_73251-2120_EdgeMount_Horizontal | J4 |
| 1 | TPSM82813 | Package_QFN:QFN-FCMOD-VCA0013A | U3 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from ISSUIUC/ISS-PCB
12- 4 layers60 × 100 mm

- 4 layers60 × 100 mm

- 4 layers45 × 100 mm

- 4 layers45 × 100 mm

- 4 layers70 × 70 mm

- 4 layers25 × 80 mm

- 4 layers70 × 70 mm

- 4 layers40 × 60 mm

- 2 layers40 × 60 mm

- 4 layers40 × 40 mm

- 4 layers62 × 82 mm
/GATOR.kicad_pcb.jpg?size=s&soon)
- 2 layers100 × 80 mm

Similar boards
- 4 layers65.8 × 56.1 mm

MosaicG5 RPi HAT
septentrio-gnss/mosaicG5-HAT
MosaicG5-HAT: an open source Raspberry Pi HAT based on Septentrio's mosaic-G5
55 parts2 - 4 layers77.2 × 86.4 mm

Mad RP2040
Cimos/etchy
Fast, trustworthy PCB visual and geometric diff tool (Rust). Successor to gerber-diff.
117 parts1Apache-2.0 - 4 layers114.9 × 129.9 mm

Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 4 layers45 × 40 mm

- 4 layers50 × 65.1 mm

- 4 layers70 × 100 mm

- 4 layers99 × 67 mm

- 2 layers120 × 100 mm

Questions
How big is the EAGLE MK1-revB PCB?
It measures 50 × 55 mm and has 4 copper layers, 1.6 mm thick.
What parts does the EAGLE MK1-revB use?
54 parts, built around the ECMF02-2AMX6, ESP32-P4 and USB4105-GF-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EAGLE MK1-revB KiCad files?
From the ISSUIUC/ISS-PCB repository on GitHub, at the commit this page was made from: the board is boards/EAGLE-MK1/EAGLE-MK1-revB/EAGLE-MK1-revB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EAGLE MK1-revB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ISSUIUC before reusing the design.