

Pika solid
Ever wondered how a pikachu made with LEDs look like? this is a PCB that lights a set of lamps, where the design is inspired by the cute pokemon mascot, Pikachu!
- Size
- 195.5 × 167.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 9
- Pads
- 33
- Tracks, vias
- 73, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 May 2025
- Updated
- 28 May 2025
Overview
Pika solid is an open-source printed circuit board by Islamessam346, from the Islamessam346/Pikachu_PCB repository on GitHub. It is a 2-layer board of 195.5 × 167.5 mm with 17 parts on 9 nets, routed with 73 tracks and 0 vias.
Its parts include 6 resistors, 6 diodes and 1 switch.
README
README.mdPikachu_PCB
Ever wondered how a pikachu made with LEDs look like? this is a PCB that lights a set of lamps, where the design is inspired by the cute pokemon mascot, Pikachu!
Schematic
PCB
Features
- a nice light decoration for your room
- the very cute pokemon pikachu
- a lot of lightning bolts+the hack club flag
- Turnable on and off
How to build
Just order the PCB & components, open up the KiCAD file and build it accordingly.
BOM
- 1 Battery holder
- 6 2.12V LED
- 6 10k Resistor
- 1 Button switch
Made by @Eslam Essam on slack id :U08260E7B4J
Made as a part of http://solder.hackclub.com/!
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
| 6 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | SW_SPST | Button_Switch_THT:SW_SPST_Omron_B3F-40xx | SW1 |
Similar boards
- 2 layers50 × 35 mm

- 2 layers139.7 × 62.2 mm

- 2 layers29.2 × 55.9 mm

Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm

- 2 layers56.3 × 55.7 mm

StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm

SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm

- 2 layers36 × 51 mm

Questions
How big is the Pika solid PCB?
It measures 195.5 × 167.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pika solid use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pika solid KiCad files?
From the Islamessam346/Pikachu_PCB repository on GitHub, at the commit this page was made from: the board is pika solid.kicad_pcb and its schematic pika solid.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pika solid design in my own project?
Its repository states no licence, so its author keeps all rights: ask Islamessam346 before reusing the design.