
B Sides 2024
OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences

HOPE Final Project: Laser Harp
ESP32 S2 SOLO N4 Kicad Reference Design is an open-source printed circuit board by ishirgarg, from the ishirgarg/Laser_Harp repository on GitHub. It is a 2-layer board of 95 × 110 mm with 65 parts on 70 nets, routed with 499 tracks and 54 vias.
It is built around the ESP32-S2-SOLO-N8, LM339DR and SPL PL90, with the SMAJ5.0CA and 1N4148WT among its other parts. Its parts include 22 resistors, 10 capacitors, 5 ICs, 5 diodes and 4 switches. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 60k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R10, R12, R15, R17, R19, R21 |
| 7 | R_Photo | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | R5, R7, R9, R14, R16, R18, R20 |
| 7 | SPL_PL90 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | LD1, LD2, LD3, LD4, LD5, LD6, LD7 |
| 3 | .1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C6 |
| 3 | TestPoint | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP1, TP2, TP3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C9 |
| 2 | 220pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 5.1 k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | LM339DR | footprints:D14 | U3, U10 |
| 2 | SMAJ5.0CA | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3 |
| 2 | SW_SPDT | Button_Switch_SMD:SW_DPDT_CK_JS202011JCQN | SW3, SW5 |
| 2 | Speaker | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | LS1, LS2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 180k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 1N4148WT | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 60k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 91 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 1 | Boot | footprints 2:SWDIP2_256X170P100 | SW2 |
| 1 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | D_Schottky | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | ESP32-S2-SOLO | ESP32_S2_SOLO_N4:XCVR_ESP32-S2-SOLO-N4 | U1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U4 |
| 1 | NPN | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q1 |
| 1 | Polyfuse | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1 |
| 1 | R_Variable | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R6 |
| 1 | Reset | footprints 2:SWDIP2_256X170P100 | SW1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
The 61 most common of 65 parts.

OklahomaOpenSourceHardware/OKC-OSH-2024-Badge
2024 badge for Oklahoma PCB Tech Conferences


lolz0r/Williams-WPC-Power-Driver-Board-A-12697-3
Untested, unverifed, AI created design.


essensys-hub/essensys-i2c-etoile-0v
Carte qui relie le boîtier principal (BP, carte SC944D) aux boîtiers auxiliaires (BA1 SC940D, BA2 SC941C, BA3 SC942C) d'une installation Essensys en étoile autour d'un plan 0 V commun, à la place du chaînage d'origine.

Evan3445/Solder-PCB
The main function of the PCB is that there is a button which will control the functioning of all the LEDs present in the board.

LSUTigerRacing/Electronics
This repository contains all of the KiCad Schematics for the 2026 TigerRacing Formula SAE's Electronics Subsystem.

It measures 95 × 110 mm and has 2 copper layers, 1.6 mm thick.
65 parts, built around the ESP32-S2-SOLO-N8, LM339DR, SPL PL90 and SMAJ5.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ishirgarg/Laser_Harp repository on GitHub, at the commit this page was made from: the board is ESP32_S2_SOLO_N4 Kicad Reference Design.kicad_pcb and its schematic ESP32_S2_SOLO_N4 Kicad Reference Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ishirgarg before reusing the design.