Skip to the content
2 layers76.2 × 122.4 mm20Key macropad, the printed circuit board in 3D

This is a 20 key keypad with really REALLY bright lights!

Size
76.2 × 122.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
82
Nets
65
Pads
342
Tracks, vias
519, 72
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
8 Feb 2024
Updated
3 Oct 2025

Overview

20Key macropad is an open-source printed circuit board by isandrocks, from the isandrocks/Skyline_20K repository on GitHub. It is a 2-layer board of 76.2 × 122.4 mm with 82 parts on 65 nets, routed with 519 tracks and 72 vias.

It is built around the ATMEGA328-PU. Its parts include 34 diodes, 23 switches, 6 resistors, 5 capacitors and 3 connectors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Skyline_20K

This is a 20 key keypad with really REALLY bright lights!

This board has 12 4960 Neopixel LED's. they are all facing down for a massive aount of under glow if I make a white 3D printed case for it, or I can just use it as a searchlight.

The keypad PCB has 2 brakepoints so it can be snapped off and then connected with a right angle header.

this also acts as a sort of stand for the keypad if you dont make a case for it.

skyline_3d

skyline_PCB

Test configuration for the snap away parts

skyline_mu

First prototype done but i messed up the pads for the lighting so i need to redo some parts

skyline_proto skyline_proto

Parts

82
QtyValueFootprintReferences
201N4148Diode_SMD:D_SOD-123D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4
20SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW19, SW20 +4
1249604960_ADA:4960_ADALED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12
3SW_PushButton_Switch_Keyboard:SW_Cherry_MX_2.00u_PCBSW8, SW16, SW18
20.1uCapacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC3, C5
21N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD21, D22
222pCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC1, C2
222rResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR4, R5
25.1kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR2, R3
2SW_PushButton_Switch_THT:SW_PUSH_6mmBOOT1, RESET1
11.5kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR6
116MhzCrystal:Crystal_HC49-4H_VerticalY1
14.7uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC4
1ATmega328-PPackage_DIP:DIP-28_W7.62mmU1
1AVR-ICSPSnapeda:AVR-ICSP_ICSP-2X03-2.54X1
1Conn_01x15_PinConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ2
1Conn_01x15_SocketConnector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_VerticalJ3
1PolyfuseCapacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mmF1
1USB4085-GF-A_REVBUSB4085_GF_A:GCT_USB4085-GF-A_REVBJ1

The 77 most common of 82 parts.

Similar boards

  • 2 layers104.9 × 75.2 mmHandipi kb, the printed circuit board in 3D

    Handipi kb

    brickbots/HandiPi

    Handheld RPI4 based computer with keyboard and display

    95 parts814MIT
  • 2 layers228 × 98 mmPlaid, the printed circuit board in 3D

    Plaid

    hsgw/plaid

    12x4 ortholinear usb keyboard made by Through Hole components ONLY.

    139 parts779MIT
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers50 × 50 mmAvrcraft poed, the printed circuit board in 3D

    Avrcraft poed

    cnlohr/avrcraft

    Minecraft server optimized for 8-bit devices.

    58 parts471
  • 2 layers284.7 × 94.2 mmLumberjack, the printed circuit board in 3D

    Lumberjack

    peej/lumberjack-keyboard

    5x12 ortholinear through-hole component keyboard PCB for standard 60% cases

    165 parts403MIT
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers63.3 × 57.2 mmRam Tester, the printed circuit board in 3D

    Ram Tester

    tops4u/Ram-Tester

    Ram Tester for vintage CBM Computer RAM Chips

    42 parts118
  • 2 layers285 × 117 mmTartan, the printed circuit board in 3D

    Tartan

    hsgw/tartan

    60% keyboard made by through-hole parts only

    171 parts98

Questions

How big is the 20Key macropad PCB?

It measures 76.2 × 122.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 20Key macropad use?

82 parts, built around the ATMEGA328-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 20Key macropad KiCad files?

From the isandrocks/Skyline_20K repository on GitHub, at the commit this page was made from: the board is 20Key_macropad.kicad_pcb and its schematic 20Key_macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the 20Key macropad design in my own project?

Its repository states no licence, so its author keeps all rights: ask isandrocks before reusing the design.