Skip to the content
4 layers40 × 65 mmSplit Flap Digit Controller SMD, the printed circuit board in 3D

Split Flap Digit Controller SMD

Ir0nC0wb0y/Split-Flap
Size
40 × 65 mm
Copper layers
4
Thickness
1.6 mm
Parts
35
Nets
45
Pads
154
Tracks, vias
262, 50
Pours
12
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 May 2025
Updated
9 Aug 2025

Overview

Split Flap Digit Controller SMD is an open-source printed circuit board by Ir0nC0wb0y, from the Ir0nC0wb0y/Split-Flap repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 40 × 65 mm with 35 parts on 45 nets, routed with 262 tracks and 50 vias.

It is built around the ATMEGA328PB-AU. Its parts include 9 resistors, 7 capacitors, 6 connectors, 5 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

Split-Flap

Parts

35
QtyValueFootprintReferences
42.5KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R4, R5, R6
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad_TopBottomH1, H2, H3, H4
210kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR7, R8
218pFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2, C3
2LM66100DCKRLM66100DCKR:SOT65P210X110-6NU3, U5
1.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
1100uFLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderC5
110uFResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderC1
110uFLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderC6
110uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7
115kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
116 MHzCrystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSolderingY2
11N4007Diode_SMD:D_SMA_HandsolderingD5
11kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1500RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1ADDR SELECTORButton_Switch_THT:SW_DIP_SPSTx05_Slide_6.7x14.26mm_W7.62mm_P2.54mm_LowProfileSW1
1ATmega328PB-APackage_QFP:TQFP-32_7x7mm_P0.8mmU6
1DATA_INConnector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_HorizontalJ4
1DATA_OUTConnector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_HorizontalJ5
1ENDSTOPConnector_JST:JST_XH_S3B-XH-A-1_1x03_P2.50mm_HorizontalJ6
1FTDIConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ2
1ICSPConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1LD1117S50TR_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1MOTORConnector_JST:JST_XH_S5B-XH-A-1_1x05_P2.50mm_HorizontalJ3
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW2
1TPL7407LDRTPL7407LDR:SOIC127P600X175-16NU1

More from Ir0nC0wb0y/Split-Flap

2

Similar boards

  • 2 layers78 × 130 mmLofence, the printed circuit board in 3D

    Lofence

    kiu/lofence

    LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

    65 parts142MIT
  • 2 layers102 × 81.5 mmC64pico, the printed circuit board in 3D

    C64pico

    silvervest/c64pico

    This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4

    97 parts86
  • 2 layers58.4 × 34.3 mmSIO2SD, the printed circuit board in 3D

    SIO2SD

    c0pperdragon/SIO2SD

    An Arduino-based floppy drive emulator for the atari 8 bit computers.

    26 parts83
  • 2 layers200 × 100 mmRegalodilara, the printed circuit board in 3D

    Regalodilara

    valerionew/very-good-uc-doggos

    A special graduation present for a special friend. Six microcontrollers in one devboard

    91 parts50
  • 2 layers88.9 × 50.8 mmBLDC BIZ CARD, the printed circuit board in 3D

    BLDC BIZ CARD

    ageppert/Brushless-Motor-Biz-Card

    A brushless motor and driver built in to a business card form-factor for learning and experimenting!

    82 parts38MIT
  • 2 layers52.1 × 37.4 mmConsolizer, the printed circuit board in 3D

    Consolizer

    orangeglo/PS2PSP

    Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)

    25 parts38GPL-3.0
  • 2 layers67.3 × 54 mmJeep radio, the printed circuit board in 3D

    Jeep radio

    latonita/jeep-canbus

    Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features

    52 parts30MIT
  • 2 layers91.4 × 92.5 mmNano328PB, the printed circuit board in 3D

    Nano328PB

    tomaskovacik/hw

    HW (pcb, schematics etc) for my projects

    450 parts27

Questions

How big is the Split Flap Digit Controller SMD PCB?

It measures 40 × 65 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Split Flap Digit Controller SMD use?

35 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Split Flap Digit Controller SMD KiCad files?

From the Ir0nC0wb0y/Split-Flap repository on GitHub, at the commit this page was made from: the board is Electronics/SF_Digit-Controller/Split-Flap_Digit-Controller_SMD.kicad_pcb and its schematic Electronics/SF_Digit-Controller/SF-DC_HE-BREAKOUT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Split Flap Digit Controller SMD design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).