
Bldc&foc motor controller
bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.

Cellular is an open-source printed circuit board by iotmakervn, from the iotmakervn/esp32-cellular-shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 55 parts on 46 nets.
It is built around the SIM800H, MP2365DN-LF-P and 2SC1815, with the MBRS340 and SMF05C among its other parts. Its parts include 23 resistors, 12 capacitors, 7 diodes, 4 transistors and 3 ICs. It belongs with the ESP32 boards of this library.
dev: sangseu
| cellular-shield | esp-uno |
|---|---|
| VDD | 5V |
| GND | GND |
| TX> | 1 |
| RX< | 0 |
| RI | ? |
| DCD | ? |
| DTR | ? |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 2SC1815 | lib:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | 4.7k | lib:R_0603 | R6, R11, R24, R27 |
| 4 | 4k7 | lib:R_0603 | R12, R13, R25, R28 |
| 3 | 1k | lib:R_0603 | R3, R4, R5 |
| 3 | 22R | lib:R_0603 | R18, R19, R20 |
| 2 | 10K | lib:R_0603 | R14, R29 |
| 2 | 10R | lib:R_0603 | R1, R2 |
| 2 | 10uF | lib:C_0603 | C1, C32 |
| 2 | Led_SIM | LEDs:LED_0805 | D6, D7 |
| 2 | SW_PUSH | lib:SW_SPST_B3U-1000P-B | SW1, SW2 |
| 1 | 0.1uF | lib:C_0603 | C4 |
| 1 | 0R | lib:R_0603 | R26 |
| 1 | 100nF | lib:C_0603 | C28 |
| 1 | 100uF | Capacitors_SMD:C_1210 | C31 |
| 1 | 10k | lib:R_0603 | R10 |
| 1 | 10k-1% | lib:R_0603 | R8 |
| 1 | 10nF | lib:C_0603 | C12 |
| 1 | 10pF | lib:C_0603 | C34 |
| 1 | 10uF/35V | Capacitors_SMD:C_1210 | C2 |
| 1 | 20k | lib:R_0603 | R7 |
| 1 | 22pF | lib:C_0603 | C29 |
| 1 | 33,6k-1% | lib:R_0603 | R9 |
| 1 | 33pF | lib:C_0603 | C33 |
| 1 | 4.7nF | lib:C_0603 | C10 |
| 1 | 4.7uH-2.2A | Choke_SMD:Choke_SMD_6.3x6.3_H3 | L1 |
| 1 | 47uF | lib:C_0603 | C13 |
| 1 | 5.1V/500mA | Diodes_SMD:D_MiniMELF_Standard | D1 |
| 1 | ANTENNA | lib:coaxial_u.fl-r-smt-1 | ANT1 |
| 1 | ARDUINO_SHIELD | arduino_shields:ARDUINO_SHIELD_2 | SHIELD1 |
| 1 | Chip anten | lib:point_test | P3 |
| 1 | D | lib:do214ac | D4 |
| 1 | Led_pwr | LEDs:LED_0805 | D3 |
| 1 | MBRS340 | lib:do214ab | D2 |
| 1 | MP2365DN | SMD_Packages:SOIC-8-N | U1 |
| 1 | SIM HOLD - PPSS-6P | lib:Micro_SIM_6P_PUSH_SKM01 | U6 |
| 1 | SIM800H | lib:SIM800H | U2 |
| 1 | SMF05C | TO_SOT_Packages_SMD:SOT-363_SC-70-6 | D5 |

bejaouihamza/bldc-foc-pcb
This open-source hardware project is a compact, single-board FOC (Field-Oriented Control) motor driver designed for precision robotics, drones, CNC machines, and automation systems.




jimbro1000/CoCoDragonMultiPak
This repository contains the designs for a Dragon 32/64 multipak interface based closely on the TRS-80 Color Computer multipak system.


omarothman2004/Boost-Converter
A 12V, LT1302-based step-up DC-DC converter board made for efficient voltage boosting with optimized inductor selection and low-noise layout routing.

rzuehlsd/VT100-Terminal-on-Bare-Metal-Pi-Zero
This is a bare metal implementation of a VT100 terminal based on the work of Filippo Bergamasco (https://github.com/fbergama/pigfx).
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the SIM800H, MP2365DN-LF-P, 2SC1815 and MBRS340. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the iotmakervn/esp32-cellular-shield repository on GitHub, at the commit this page was made from: the board is cellular.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask iotmakervn before reusing the design.