

TinySerialServo
Breakout board that drives a servo via I2C, with up to 16 selectable addresses.
- Size
- 26.7 × 12.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 11
- Pads
- 52
- Tracks, vias
- 162, 41
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 16 Dec 2025
- Updated
- 21 Dec 2025
Overview
TinySerialServo is an open-source printed circuit board by iostream-di, from the iostream-di/TinySerialServo repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 26.7 × 12.2 mm with 23 parts on 11 nets, routed with 162 tracks and 41 vias.
Its parts include 7 resistors, 6 capacitors, 2 diodes, 2 connectors and 2 switches. It belongs with the PIC boards of this library.
README
README.mdTinySerialServo
Breakout board that drives a servo via I2C, with up to 16 selectable addresses.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | PIC12LF1840-xSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the TinySerialServo PCB?
It measures 26.7 × 12.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TinySerialServo use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TinySerialServo KiCad files?
From the iostream-di/TinySerialServo repository on GitHub, at the commit this page was made from: the board is KiCAD/TinySerialServo.kicad_pcb and its schematic KiCAD/TinySerialServo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TinySerialServo design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).