
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Minimal MAX17761 is an open-source printed circuit board by ionutms, from the ionutms/Minimal_MAX17761 repository on GitHub, published under the MIT licence. It is a 4-layer board of 31.2 × 12.7 mm with 24 parts on 12 nets, routed with 23 tracks and 48 vias.
It is built around the MAX17761ATC+, CRCW0402105KFKEDC and KGM31HR71H225KU, with the XAL5050-223ME, CRCW040257K6FKEDC and AC0402KRX7R9BB682 among its other parts. Its parts include 7 resistors, 6 capacitors, 2 connectors, 1 IC and 1 inductor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | test_point_footprints:TestPoint_THTPad_Castelated | TP1, TP2, TP3, TP4 |
| 2 | 100 nF | capacitor_footprints:C_0402_1005Metric | C3, C5 |
| 2 | FW-02-03-G-D-085-155 | connector_footprints:FW-02-03-G-D-085-155 | J1, J2 |
| 2 | mouse-bite-midle-50mil-200mil | mouse_bite_footprints:mouse-bite-midle-50mil-200mil | MB1, MB2 |
| 1 | 1 µF | capacitor_footprints:C_0402_1005Metric | C4 |
| 1 | 10 kΩ | resistor_footprints:R_0402_1005Metric | R4 |
| 1 | 105 kΩ | resistor_footprints:R_0402_1005Metric | R5 |
| 1 | 137 kΩ | resistor_footprints:R_0402_1005Metric | R2 |
| 1 | 15.4 kΩ | resistor_footprints:R_0402_1005Metric | R3 |
| 1 | 18.2 kΩ | resistor_footprints:R_0402_1005Metric | R6 |
| 1 | 2.2 µF | capacitor_footprints:C_1206_3216Metric | C1 |
| 1 | 22 µH | inductor_footprints:XAL5050 | L1 |
| 1 | 430 kΩ | resistor_footprints:R_0402_1005Metric | R1 |
| 1 | 47 µF | capacitor_footprints:C_1210_200_3225Metric | C2 |
| 1 | 57.6 kΩ | resistor_footprints:R_0402_1005Metric | R7 |
| 1 | 6.8 nF | capacitor_footprints:C_0402_1005Metric | C6 |
| 1 | MAX17761ATC+ | analog_devices_footprints:21-0664_TD1233&plus_1C_MXM | U1 |
| 1 | SolderJumper_2_Bridged | solder_jumper_footprints:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…

Redherring32/Xbox-Portable
Fully portable original (2001) Xbox handheld using real hardware

John-owo/pcb-agent-workflow
用 Claude Code/Codex 搭配 KiCad 10 設計 PCB、交 JLCPCB 製造的工作流程:流程文件、專案範本、JLC 客服溝通 skill、生產稿比對腳本與範例設計

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.


OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging

It measures 31.2 × 12.7 mm and has 4 copper layers, 1.6 mm thick.
24 parts, built around the MAX17761ATC+, CRCW0402105KFKEDC, KGM31HR71H225KU and XAL5050-223ME. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ionutms/Minimal_MAX17761 repository on GitHub, at the commit this page was made from: the board is minimal_max17761/minimal_max17761.kicad_pcb and its schematic minimal_max17761/minimal_max17761.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).