2 layers106.4 × 95 mm
2 layers51.2 × 61 mm
Breakout
ioncodes/gb-dbg-brk- Size
- 51.2 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 67
- Pads
- 174
- Tracks, vias
- 712, 84
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Dec 2025
- Updated
- 30 Dec 2025
Overview
Breakout is an open-source printed circuit board by ioncodes, from the ioncodes/gb-dbg-brk repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.2 × 61 mm with 9 parts on 67 nets, routed with 712 tracks and 84 vias.
It is built around the 74ALVC164245DL. Its parts include 4 capacitors, 2 ICs, 2 connectors and 1 resistor. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 2 | 74ALVC164245 | Package_SO:TSSOP-48_6.1x12.5mm_P0.5mm | U1, U2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x32 | GameBoy:Base PCB | J1 |
| 1 | Conn_02x16_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x18_P2.54mm_Vertical_SMD | J2 |
Similar boards
- 4 layers180.3 × 211.3 mm
For real 486
Xeraster/32bit_486_motherboard
A completely DIY 486 motherboard. Even the chipset is a DIY fpga thing. This version has a 32 bit front side bus and a 16 bit ISA bis
256 parts18GPL-3.0 - 4 layers100 × 100 mm
- 4 layers100 × 110 mm
Nes dev cart
nesos-dev/nes-dev-cart
NES-DEV-CART: Open-source FPGA development cartridge for the Nintendo Entertainment System
42 parts8GPL-3.0 - 6 layers100 × 100 mm
- 4 layers57 × 83.6 mm
M68K BUS VOLTAGE CONVERTER
teknoman117/M68K-BUS-VOLTAGE-CONVERTER
A breakout board for the MC68010 which converts the 5V bus to a 3.3V bus you can connect to an FPGA
24 parts2 - 4 layers106.4 × 95 mm
Isavideo
ianhan/graphics-gremlin-gizmo
This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.
142 parts1 - 2 layers100 × 59 mm
Coolgirl NES Rev6.x
viuhimciuc/coolgirl-nes-multicart
Ultimate multigame cartridge for Nintendo Entertainment System (NES)
66 parts
Questions
How big is the Breakout PCB?
It measures 51.2 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout use?
9 parts, built around the 74ALVC164245DL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout KiCad files?
From the ioncodes/gb-dbg-brk repository on GitHub, at the commit this page was made from: the board is breakout.kicad_pcb and its schematic breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).