MicArray
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.

Clone of bpiphany's Frosty Flake, but based on his Voice-of-Reason PCB
Frosty flake clone is an open-source printed circuit board by inventowiz, from the inventowiz/frosty-flake-clone repository on GitHub. It is a 2-layer board of 55.6 × 32.3 mm with 19 parts on 75 nets, routed with 901 tracks and 113 vias.
It is built around the ATMEGA32U2-AU, SN74HC138D and B3U-1000P. Its parts include 4 resistors, 4 ICs, 3 connectors, 1 capacitor and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SN74HC138 | Silicon-Standard:TSSOP16 | U2, U3, U4 |
| 2 | 15k | Capacitors:0603 | R3, R4 |
| 2 | 220 | Capacitors:0603 | R1, R2 |
| 2 | 8x 1k | Resistor_SMD:R_Array_Convex_8x0602 | RN1, RN2 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x10_P2.00mm_Vertical | J2, J3 |
| 2 | Ferrite_Bead | Capacitors:0603 | FB1, FB2 |
| 1 | 1uF | Capacitors:0805 | C1 |
| 1 | ATmega32U2-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connectors:2X3 | J1 |
| 1 | B3U-1000P | digikey-footprints:Switch_Tactile_SMD_B3U-1000P | S1 |
| 1 | RESONATOR-16MHZSMD_3.2X1.3 | Clocks:RESONATOR-SMD-3.2X1.3 | Y1 |
| 1 | SN65220DBVR | digikey-footprints:SOT-23-6 | TVS1 |
dylanzodrow/Aerial_Drone_Tracking
Hopefully, the final pcb designs. In this iteration the microphones are on breakout boards and the traces are enlarged to ensure proper insulation when manufactured.



cookpad/cookpad-pad
Cookpad Pad — A six keys macro pad made by Cookpad.




ScatteredDrifter/Endeavour
An 38 key orthogonal Keyboard with 3d printable case
It measures 55.6 × 32.3 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ATMEGA32U2-AU, SN74HC138D and B3U-1000P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the inventowiz/frosty-flake-clone repository on GitHub, at the commit this page was made from: the board is frosty-flake-clone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask inventowiz before reusing the design.