interspecifics/wave_reflectorwave_reflector is a eeg instrument/interface for live performance and installation
Wave reflector is an open-source printed circuit board by interspecifics, from the interspecifics/wave_reflector repository on GitHub. It is a 2-layer board of 107.8 × 91.5 mm with 52 parts on 65 nets, routed with 448 tracks and 4 vias.
It is built around the ESP32-S2-DEVKITC-1, 74HC14 and IRF540N. Its parts include 16 resistors, 16 diodes, 8 transistors, 8 connectors and 3 ICs. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 8 | 1N4004 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D4, D6, D8, D10, D12, D14, D16 |
| 8 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | LED | LED_THT:LED_D3.0mm | D1, D3, D5, D7, D9, D11, D13, D15 |
| 2 | 74HC14 | Package_DIP:DIP-14_W7.62mm | U2, U3 |
| 1 | 10uF TANT | Capacitor_THT:CP_Radial_Tantal_D4.5mm_P2.50mm | C1 |
| 1 | ESP32-S2-DEVKITC-1 | ESP32-S2-DEVKITC-1:MODULE_ESP32-S2-DEVKITC-1 | U1 |
| 1 | M1_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J1 |
| 1 | M2_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J2 |
| 1 | M3_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J3 |
| 1 | M4_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J4 |
| 1 | M5_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J5 |
| 1 | M6_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J6 |
| 1 | M7_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J7 |
| 1 | M8_connector | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J8 |
RaviPatel021/Air-Hockey-Bot
This repository contains all the code and hardware files for an autonomous air hockey table system. The system uses a 2-axis gantry controlled by an ESP32, with real-time vision and inference running on either a laptop…
Mario-dango/Proyecto-RV
Dispositivos de Entrada: Joystick analógico (2 GDL) para tracción, pulsadores de acción y MPU6050 (Acelerómetro/Giroscopio) para seguimiento de gestos de inclinación.
Mkhalaf203/4-DOF-Robotic-Arm
This repository contains the complete engineering files for a 4-Degree-of-Freedom (4-DOF) Robotic Arm System, featuring a gesture-controlled master-slave architecture.
GGoodacre/WindChargeController-Capstone2024
Solar Charge Controller for BEng Capstone 2024
profdc9/DRSSTC-PCB-Pack
A pack of PCBs for a dual resonant solid state tesla coil setup. Pretty much everything you need.
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
It measures 107.8 × 91.5 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the ESP32-S2-DEVKITC-1, 74HC14 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the interspecifics/wave_reflector repository on GitHub, at the commit this page was made from: the board is hardware/wave_reflector/wave_reflector.kicad_pcb and its schematic hardware/wave_reflector/wave_reflector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask interspecifics before reusing the design.