2 layers22.2 × 46.4 mm
C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112
2 layers
Microsynth noeuro
interspecifics/TinySynth-- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 16
- Pads
- 65
- Tracks, vias
- 0, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 May 2019
- Updated
- 15 May 2019
Overview
Microsynth noeuro is an open-source printed circuit board by interspecifics, from the interspecifics/TinySynth- repository on GitHub. It is a 2-layer board with 15 parts on 16 nets.
It is built around the ATTINY85-20PU. Its parts include 5 resistors, 3 switches, 2 connectors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Potentiometer_THT:Potentiometer_Alps_RK09L_Single_Vertical | RV1, RV2, RV3 |
| 3 | 47K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R2, R5 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH-12mm_Wuerth-430476085716 | SW2, SW3 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4 |
| 1 | ATtiny85-20PU | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | AudioJack3_Ground | teensy:StereoJack_3.5mm_Switch_Ledino_KB3SPRS_Horizontal_TRS | J2 |
| 1 | LED | LED_THT:LED_D5.0mm_FlatTop | D1 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J1 |
Questions
What parts does the Microsynth noeuro use?
15 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Microsynth noeuro KiCad files?
From the interspecifics/TinySynth- repository on GitHub, at the commit this page was made from: the board is electronics/microsynth/microsynth_noeuro.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Microsynth noeuro design in my own project?
Its repository states no licence, so its author keeps all rights: ask interspecifics before reusing the design.
Similar boards
- 2 layers30.7 × 76.1 mm
Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm
Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm
Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers
- 2 layers55.9 × 55.9 mm
- 2 layers71.1 × 40.6 mm
Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22 - 2 layers242 × 60 mm
