Skip to the content
2 layers31.1 × 24 mmEcran, the printed circuit board in 3D

Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

Size
31.1 × 24 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
19
Pads
43
Tracks, vias
91, 9
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
27 Aug 2018
Updated
18 Feb 2026

Overview

Ecran is an open-source printed circuit board by INSA-GEI, from the INSA-GEI/dumber repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 31.1 × 24 mm with 14 parts on 19 nets, routed with 91 tracks and 9 vias.

It is built around the HDSM-283F. Its parts include 8 resistors and 1 connector. It belongs with the STM32 boards of this library.

Main components

1

README

README.md

Dumber

Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

Repertoires

  • hardware : contient les plans pour la partie mecanique du robot et de son chargeur, ainsi que les plans de conception des PCB du robot, du chargeur, de l'adaptateur Xbee pour la raspberry et les plans des CAP du robot
  • software: rassemble les parties logicielles du robot, du chargeur, les bibliotheques et superviseur coté raspberry et l'interface Web
  • doc: contient les sujets de TD et TP
  • aruco_markers: Script de generation des tags (aruco) utilisés sur les robots

Parts

14
QtyValueFootprintReferences
81KResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8
4MountingHoleMountingHole:MountingHole_3mmH1, H2, H3, H4
1HDSM-283FINSA:LED_HDSM-283FDS1
1TE 1-84981-0INSA:TE 1-84981-0J1

More from INSA-GEI/dumber

3
  • 2 layers93.3 × 48.1 mmEcran duplication, the printed circuit board in 3D

    Ecran duplication

    INSA-GEI/dumber

    Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

    84 parts9GPL-3.0
  • 2 layers88 × 86 mmDumber v3, the printed circuit board in 3D

    Dumber v3

    INSA-GEI/dumber

    Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

    70 parts9GPL-3.0
  • 2 layers32.3 × 64.2 mmShield Pi Xbee, the printed circuit board in 3D

    Shield Pi Xbee

    INSA-GEI/dumber

    Depot du projet de temps reel 4eme année au departement GEI de l'INSA Toulouse.

    2 parts9GPL-3.0

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Ecran PCB?

It measures 31.1 × 24 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ecran use?

14 parts, built around the HDSM-283F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ecran KiCad files?

From the INSA-GEI/dumber repository on GitHub, at the commit this page was made from: the board is hardware/pcb/Dumber/ecran/ecran/ecran.kicad_pcb and its schematic hardware/pcb/Dumber/dumber-v3/cpu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ecran design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).