2 layers40 × 20 mm
2 layers62.2 × 125 mm
Flex
Innaf0/Tianyan3and here's the backside with valo art again NOW BUILTTT:)
- Size
- 62.2 × 125 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 43
- Pads
- 95
- Tracks, vias
- 431, 123
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Apr 2026
- Updated
- 15 Aug 2026
Overview
Flex is an open-source printed circuit board by Innaf0, from the Innaf0/Tianyan repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 62.2 × 125 mm with 13 parts on 43 nets, routed with 431 tracks and 123 vias.
Its parts include 3 switches and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdvalorant-flex
I made Tianyan (天眼) inspired by an actual valorant flex named Statcom. With Tianyan you can check your K/D/A, on which map is your win rate the highest,which agent you use the most,your rank etc. you can even play music on it! This project came into existence bc I was lowk obsessed with valo :D
Assembly steps:
- get your PCB and put all your components on it
- print the shell and the buttons
- melt the heat set inserts into the frontshell
- assemble everything together and tighten with screws
- flash the firmware and you're done:D !!!
3D models now builttt :)
Here's the front side of my 3D model with valo art NOW BUILT!!
and here's the backside with valo art again NOW BUILTTT:)
PCB with and without components!
Here's the front of my PCB w components:
Here's the back of my PCB w components
AND here's my PCB without components so you can see the art!!
Schematic:3
Here's my schematic just incase lmao
ZINE page(pdf.)
Here's my ZINE<3
BOM ;)
Here's my BOM!!
| item: | price per unit: | quantity: | total price: | link: |
|---|---|---|---|---|
| Display | $10.52 | 1 | $10.52 | https://www.aliexpress.com/item/1005005334824151.html |
| Pi pico2 | $13.20 | 1 | $13.20 | https://www.aliexpress.com/item/1005009845096943.html |
| DAC | $4.95 | 1 | $4.95 | https://www.adafruit.com/product/6250 |
| Speaker | $3.61 | 1 | $3.61 | https://www.aliexpress.com/item/1005005701427186.html |
| button | $0.0182 | 1 | $0.0182 | https://www.aliexpress.com/item/1005007623070623.html |
| right-angle button | $0.0895 | 2 | $0.179 | https://www.aliexpress.com/item/1005006149378588.html |
| battery holder | $0.68 | 1 | $0.68 | https://www.aliexpress.com/item/1005008468643124.html |
| PCB | $0.40 | 1 | $0.40 | https://cart.jlcpcb.com |
| screws | $0.077 | 3 | $0.230 | https://www.aliexpress.com/item/1005007264845313.html |
| heat set insert | $0.070 | 3 | $0.209 | https://www.aliexpress.com/item/1005006798286851.html |
| total price: | $34.00 |
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_Push | Button_Switch_THT:SW_SPST_Omron_B3F-315x_Angled | SW2, SW3 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | SW_Push | easyeda2kicad:SW-TH_4P-L4.5-W4.5-P3.00-LS4.8 | SW1 |
| 1 | Speaker | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | ~ | LIB:DAC | U1 |
| 1 | ~ | LIB:Display | DS1 |
Questions
How big is the Flex PCB?
It measures 62.2 × 125 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flex use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flex KiCad files?
From the Innaf0/Tianyan repository on GitHub, at the commit this page was made from: the board is flex/flex.kicad_pcb and its schematic flex/Fallout-PCB/Fallout-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flex design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers74.9 × 49.5 mm
- 2 layers35 × 29 mm
MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm
AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm
- 2 layers95 × 95 mm
Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm
Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0