Storm tracker
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package

Ablage für den Anhang meiner Bachelorarbeit im Studiengang Elektronik der FH Technikum Wien
ESP32-C6 Temp Sensor is an open-source printed circuit board by IN4148, from the IN4148/Open-Source-Temperature-Sensor-ESP32-C6 repository on GitHub. It is a 2-layer board of 30 × 28 mm with 35 parts on 43 nets, routed with 253 tracks and 51 vias.
It is built around the ESP32-C6-MINI-1U-H4, SHT40-AD1B-R2 and MIC5504-3.3YM5-TR, with the USBLC6-2SC6 among its other parts. Its parts include 6 capacitors, 6 resistors, 4 ICs, 4 connectors and 1 diode. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP5, TP6, TP8, TP9, TP10, TP11, TP14, TP15 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R6 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C5 |
| 3 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3 |
| 2 | GND_Point | TestPoint:TestPoint_Pad_2.0x2.0mm | TP-GND1, TP-GND2 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.4 | C6 |
| 1 | 6V 0,5A | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | ESP32-C6-MINI-1/U | Espressif:ESP32-C6-MINI-1 | U3 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | M2-Screw | MountingHole:MountingHole_2.2mm_M2_Pad | H1 |
| 1 | MIC5504-3.3YM5-TR | MIC5504-3.3YM5-TR:SOT95P280X145-5N | IC1 |
| 1 | SHT40-AD1B-R2 | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package


Jonkaphi/Numerical-Keypad-with-Audio-FX
The extra little feature of having audio fx being played locally on the keyboard with each button press, was from one of the commenters on reddit related to a post. The sound files will be read from the placed SD card.


Project-Touchscape/Touchscape-PCB
PCB designs for sensors, drivers, routing, and communication

samnadol/ROV_PCIe_USB_HUB
up-to-16 port USB hub + PCIe host controller "hat" for Pi 5

rspolyak/desk-dashboard-hw
ESP32-S3 desk dashboard board that plugs straight into a 3.5" MSP3526 capacitive touch display. USB-C powered, with a light sensor, SHT40 temperature/humidity sensor and a 41.5 × 35 mm 2-layer PCB

JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
It measures 30 × 28 mm and has 2 copper layers, 1.6 mm thick.
35 parts, built around the ESP32-C6-MINI-1U-H4, SHT40-AD1B-R2, MIC5504-3.3YM5-TR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IN4148/Open-Source-Temperature-Sensor-ESP32-C6 repository on GitHub, at the commit this page was made from: the board is PCB Design/ESP32-C6_Temp_Sensor/ESP32-C6_Temp_Sensor.kicad_pcb and its schematic PCB Design/ESP32-C6_Temp_Sensor/ESP32-C6_Temp_Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IN4148 before reusing the design.