imtua/ImtDeck1ImtDeck, a cyberdeck designed by Imtiaz Ahmed. In ImtDeck, basic tasks and a light AI can be run easily. In this project, it technically contains 2 projects, ImtDeck-Carrier and ImtKeeb-Ortho62.
ImtDeck Carrier is an open-source printed circuit board by imtua, from the imtua/ImtDeck repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 160 × 80 mm with 170 parts on 324 nets, routed with 1,713 tracks and 681 vias.
It is built around the SY8253ADC, MAX98357AETE+T and ULC0524P, with the TPAZ1023-04F, ESD5V0B03-523 and 2SK3018 among its other parts. Its parts include 52 capacitors, 46 resistors, 16 diodes, 9 ICs and 8 connectors.
ImtDeck, a cyberdeck designed by Imtiaz Ahmed. In ImtDeck, basic tasks and a light AI can be run easily. In this project, it technically contains 2 projects, ImtDeck-Carrier and ImtKeeb-Ortho62.
Stardance project: https://stardance.hackclub.com/projects/54966
Check ImtDeck BOM.csv for links.
ImtKeeb-Ortho62 is a low-profile ortholinear 62 key keyboard that contains a trackpad in it.
PCB of ImtKeeb-Ortho62:
3D PCB of ImtKeeb-Ortho62:
ImtKeeb-Ortho62 will feature-
Files of ImtKeeb-Ortho62
This can be used without the ImtDeck.
ImtDeck-Carrier is a carrier that holds the lattepanda and makes it route and connect to devices like the monitor, fan, keyboard etc.
Schematic of ImtDeck-Carrier:
PCB of ImtDeck-Carrier:
ImtDeck-Carrier will hold the Lattepanda MU in its place and will distribute powers between items.
Files of ImtKeeb-Ortho62
| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100nF/50V | A_HDJ_Library:C_0402_1005Metric | C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C52, C54, C58 +6 |
| 17 | 22uF/10V | A_HDJ_Library:C_0603_1608Metric | C30, C31, C32, C64, C65, C67, C68, C74, C75, C76, C77, C80, C81, C82, C83, C86 +1 |
| 9 | TestPoint | A_HDJ_Library:TestPoint_Pad_D1.5mm | SD_Mode, TP2, TP4, TP5, TP6, TP7, TP11, TP12, TP13 |
| 8 | 2.2K/1% | A_HDJ_Library:R_0402_1005Metric | R3, R5, R15, R18, R19, R30, R52, R53 |
| 8 | 470R/1% | A_HDJ_Library:R_0402_1005Metric | R7, R8, R9, R10, R13, R14, R16, R17 |
| 8 | ESD5V0B03 | A_HDJ_Library:D_0402_1005Metric | D1, D2, D3, D5, D6, D7, D8, D21 |
| 5 | 10K/1% | A_HDJ_Library:R_0402_1005Metric | R2, R34, R35, R49, R58 |
| 4 | 0R/1% | A_HDJ_Library:R_0402_1005Metric | R27, R29, R32, R33 |
| 4 | 10uF/10V | A_HDJ_Library:C_0402_1005Metric | C51, C53, C57, C59 |
| 4 | 220nF/50V | A_HDJ_Library:C_0402_1005Metric | C49, C50, C55, C56 |
| 4 | 6V/1A | A_HDJ_Library:Fuse_0805_2012Metric | F2, F3, F78, F79 |
| 4 | MountingHole_Pad | A_HDJ_Library:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | ULC0524P | A_HDJ_Library:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U3, U4, U5, U78 |
| 3 | 100K/1% | A_HDJ_Library:R_0402_1005Metric | R51, R76, R77 |
| 3 | 100R/1% | A_HDJ_Library:R_0402_1005Metric | R46, R48, R69 |
| 3 | 1K/1% | A_HDJ_Library:R_0402_1005Metric | R1, R11, R47 |
| 3 | 21.5K/1% | A_HDJ_Library:R_0402_1005Metric | R6, R59, R68 |
| 3 | 2SK3018 | A_HDJ_Library:SOT-23 | Q2, Q3, Q4 |
| 3 | SS54 | A_HDJ_Library:D_SMA | D15, D16, D17 |
| 2 | 10K/1% | Resistor_SMD:R_0402_1005Metric | R78, R79 |
| 2 | 12pF/50V | Capacitor_SMD:C_0402_1005Metric | C72, C73 |
| 2 | 1N5819WS | A_HDJ_Library:D_SOD-323 | D4, D26 |
| 2 | 2.2uH/4.3A | A_HDJ_Library:L_Sunlord_SWPA4020S | L1, L2 |
| 2 | 2N7002 | A_HDJ_Library:SOT-23 | Q1, Q8 |
| 2 | 4.7K/1% | A_HDJ_Library:R_0402_1005Metric | R60, R72 |
| 2 | Conn_01x04_Socket | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J79, J80 |
| 2 | LED_G | A_HDJ_Library:LED_0603_1608Metric | D9, D22 |
| 2 | MountingHole_M2.0 | A_HDJ_Library:MountingHole_3mm_M2_Pad_TopOnly | H7, H8 |
| 2 | MountingHole_Pad | A_HDJ_Library:MountingHole_3mm_M2_Pad_TopOnly | H5, H6 |
| 2 | SY8253ADC | A_HDJ_Library:TSOT-23-6 | U15, U16 |
| 2 | TPAZ1023-04F | A_HDJ_Library:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U1, U2 |
| 1 | 100nF | A_HDJ_Library:C_0402_1005Metric | C88 |
| 1 | 10uF | A_HDJ_Library:C_0402_1005Metric | C87 |
| 1 | 1M | A_HDJ_Library:R_0402_1005Metric | R80 |
| 1 | 1M/1% | A_HDJ_Library:R_0402_1005Metric | R4 |
| 1 | 1uF/16V | A_HDJ_Library:C_0402_1005Metric | C66 |
| 1 | 21.5K/1% | Resistor_SMD:R_0402_1005Metric | R66 |
| 1 | 3V3 Izt=5mA | A_HDJ_Library:D_SOD-323 | D24 |
| 1 | 4.7K/1% | Resistor_SMD:R_0402_1005Metric | R64 |
| 1 | 6V/2A | A_HDJ_Library:R_0805_2012Metric | F4 |
| 1 | 6V/2A | A_HDJ_Library:Fuse_0805_2012Metric | F5 |
| 1 | 6V/50mA | A_HDJ_Library:R_0603_1608Metric | F1 |
| 1 | 75K/1% | A_HDJ_Library:R_0402_1005Metric | R57 |
| 1 | Battery_Cell | A_HDJ_Library:Battery_Holder_CR1220_S8411-45R | BT1 |
| 1 | Bus_M.2_Socket_E | A_HDJ_Library:PCIe_M.2_Connectors_P=0.5mm_H=4.2mm_KeyE | J16 |
| 1 | Bus_M.2_Socket_M | A_HDJ_Library:PCIe_M.2_Connectors_P=0.5mm_H=4.2mm_KeyM | J15 |
| 1 | DC-042C-W-2.0 | easyeda2kicad:DC-IN-TH_DC-042C-W-2.0 | DC78 |
| 1 | Fan_4pin | A_HDJ_Library:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | M1 |
| 1 | HDMI_A | A_HDJ_Library:HDMI_A_Molex_208658-1001_Horizontal | J3 |
| 1 | LattePanda_Mu | Module_LattePanda:LattePanda_Module_H8.0mm_Horizontal | A1 |
| 1 | MAX98357AETE+T | MAX98357AETE:21-0136I_T1633-4_MXM | U79 |
| 1 | SW_Push | easyeda2kicad:SW-TH_TM-007-D1-A-03 | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J78 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | Gain |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP79 |
| 1 | Speaker | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | LS78 |
| 1 | USB3_A_Stacked | A_HDJ_Library:USB3_A_Molex_48406-0001_Horizontal_Stacked | J4 |
| 1 | USB_A_Stacked | A_HDJ_Library:USB_A_CUI_UJ2-ADH-TH_Horizontal_Stacked | J5 |
imtua/ImtDeck
ImtDeck, a cyberdeck designed by Imtiaz Ahmed. In ImtDeck, basic tasks and a light AI can be run easily. In this project, it technically contains 2 projects, ImtDeck-Carrier and ImtKeeb-Ortho62.
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/LtBrain/MuBook.jpg?size=s&soon)
LtBrain/MuBook
A x86 carrier board for the LattePanda Mu
![[DFR1142]Lite Carrier for LattePanda Mu, the printed circuit board in 3D](/embed/boards/meepodeep/ModuDeck.jpg?size=s&soon)
hugoNN1001/LattePanda-Mu-Custom-Carrier-Board
Personal project, work in progress - Learning digital high-speed PCB design by designing a custom carrier board for the LattePanda Mu - based on the reference design: https://github.com/LattePandaTeam/LattePanda-Mu
![[DFR1144][M027.00940](V1.0.0), the printed circuit board in 3D](/embed/boards/LattePandaTeam/LattePanda-Mu.jpg?size=s&soon)
LattePandaTeam/LattePanda-Mu
All About LattePanda Mu N100/N305 Compute Module
El-Luhb/nvme-Carrier-for-LattePanda-Mu
nvme Carrier PCB for the LattePanda Mu compute module
futureshocked/kicad_latte_panda_mu
A custom carrier-board reference design for the LattePanda Mu compute module, used as a worked example in the Tech Explorations KiCad course:
tuankoko567/LattePanda-MU-carrier-Board
Designing high-speed carrier board using KiCad, applying differential pair routing and length matching, studying impedance control and PCB stack-up planning, learning signal integrity and EMI-aware layout techniques.
It measures 160 × 80 mm and has 4 copper layers, 1.61 mm thick.
170 parts, built around the SY8253ADC, MAX98357AETE+T, ULC0524P and TPAZ1023-04F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the imtua/ImtDeck repository on GitHub, at the commit this page was made from: the board is PCB/ImtDeck-Carrier/ImtDeck-Carrier.kicad_pcb and its schematic PCB/ImtDeck-Carrier/ImtDeck-Carrier.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).