
Base
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Scrubber board 2024 is an open-source printed circuit board by imran424, from the imran424/Scrubber-PCB-Design repository on GitHub. It is a 2-layer board of 203.2 × 79.2 mm with 43 parts on 52 nets, routed with 242 tracks and 23 vias.
It is built around the PT08-0. Its parts include 15 connectors, 6 capacitors, 6 resistors, 4 transistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | 1uF Ceramic | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3, C4 |
| 4 | 2N2222 | Package_TO_SOT_THT:TO-92_HandSolder | Q1, Q2, Q3, Q4 |
| 2 | 1.5KExxCA | Diode_THT:D_DO-201AE_P15.24mm_Horizontal | D1, D2 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1, R4 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 2 | 330uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5, C6 |
| 2 | Actuator | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J11, J15 |
| 2 | PT08-0 | Ideasparq:PT080 | J13, J16 |
| 1 | 0.7k 0.05W 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 12V Power | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J6 |
| 1 | 21k 0.05W 1% | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 24V Power | SamacSys_Parts:KF2EDGR5082P | J7 |
| 1 | 24V-12V | Module:Texas_EUK_R-PDSS-T7_THT | U1 |
| 1 | 24V-5V | Module:Texas_EUK_R-PDSS-T7_THT | U2 |
| 1 | 5V Power | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J5 |
| 1 | APC | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Act Sensor | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | XA1 |
| 1 | Buttons | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Extra I/O | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | LED Strip | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J17 |
| 1 | LOGO | ideasparq:LOGO | G*** |
| 1 | Light | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad2.0mm | NT1 |
| 1 | USB_A_Stacked | Connector_USB:USB_A_Wuerth_61400826021_Horizontal_Stacked | J8 |
| 1 | Voltmeter | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 203.2 × 79.2 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the PT08-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the imran424/Scrubber-PCB-Design repository on GitHub, at the commit this page was made from: the board is Scrubber board 2024.kicad_pcb and its schematic Scrubber board 2024.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask imran424 before reusing the design.