

Display
A digital clock made of N-MOSFETs, diodes, and resistors.
- Size
- 126 × 91 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 73
- Pads
- 227
- Tracks, vias
- 361, 29
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Nov 2018
- Updated
- 13 Jan 2019
Overview
Display is an open-source printed circuit board by imihajlow, from the imihajlow/discrete-clock repository on GitHub. It is a 2-layer board of 126 × 91 mm with 85 parts on 73 nets, routed with 361 tracks and 29 vias.
Its parts include 35 resistors, 12 diodes, 10 transistors, 10 connectors and 4 ICs. It belongs with the lEDs and displays boards of this library.
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 15 | Resistor_SMD:R_0805_2012Metric | R1, R2, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +7 |
| 12 | LL103C | Diode_SMD:D_MiniMELF | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 10 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 9 | 20k | Resistor_SMD:R_0805_2012Metric | R27, R28, R29, R30, R31, R32, R33, R34, R35 |
| 8 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6, H7, H8 |
| 4 | SA23-12EWA | lib:SA10-21HWA | U1, U2, U3, U4 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric | R25, R26 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 0.63u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 10u x 16v | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C2 |
| 1 | 270 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | H | lib:DTS-644 | SW2 |
| 1 | H_CLK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Hour | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J3 |
| 1 | M | lib:DTS-644 | SW1 |
| 1 | M_CLK | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | M_Carry | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Minute1 | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J8 |
| 1 | Minute10 | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J7 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | Reset | lib:DTS-644 | SW3 |
| 1 | S_Carry | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Second | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | ~RST | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J9 |
More from imihajlow/discrete-clock
4- 2 layers53 × 91 mm

- 2 layers53 × 91 mm

- 2 layers53 × 91 mm

Display module
imihajlow/discrete-clock
A digital clock made of N-MOSFETs, diodes, and resistors.
54 parts1 - 2 layers53 × 91 mm

Similar boards
- 2 layers254.1 × 87.2 mm

- 2 layers100 × 100 mm

- 2 layers58 × 65 mm

- 2 layers198.8 × 75.6 mm

Treadstone32
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
85 parts193MIT - 2 layers91 × 82 mm

ProgrammableRelayModule4Channel
numato/samplecode
This repository contains sample code for different Numato Lab products
85 parts144 - 2 layers64.1 × 103.2 mm

Keyboard
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
85 parts94BSD-3-Clause - 2 layers210.2 × 94.3 mm

Humla
jimmerricks/humla
The Humla is a 36-key low profile keyboard based on the Reviung by gtips and the Rev-lp by cyril279. It is for choc switches (with 18x17mm spacing) and has basic support for bluetooth pro micro alternatives such as the…
85 parts85MIT - 2 layers217 × 27.5 mm

Questions
How big is the Display PCB?
It measures 126 × 91 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Display use?
85 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Display KiCad files?
From the imihajlow/discrete-clock repository on GitHub, at the commit this page was made from: the board is sch/display/display.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Display design in my own project?
Its repository states no licence, so its author keeps all rights: ask imihajlow before reusing the design.