Skip to the content
4 layersPCBPCBNEW, the printed circuit board in 3D

Illinios Robotics in Space PCB

Copper layers
4
Thickness
1.6 mm
Parts
71
Nets
74
Pads
232
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 8.0 (file 20240108)
Created
13 Feb 2023
Updated
7 Mar 2026

Overview

PCBPCBNEW is an open-source printed circuit board by IllinoisRoboticsInSpace, from the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub. It is a 4-layer board with 71 parts on 74 nets.

It is built around the 0685P9200-01. Its parts include 36 capacitors, 24 resistors, 3 ICs, 3 inductors and 3 fuses.

Main components

1

Parts

71
QtyValueFootprintReferences
1847uFCapacitor_SMD:C_0805_2012MetricC7, C10, C11, C12, C19, C20, C21, C22, C23, C24, C32, C39, C40, C41, C42, C43 +2
9100nFCapacitor_SMD:C_0805_2012MetricC2, C4, C6, C14, C16, C18, C25, C44, C48
6100kResistor_SMD:R_0805_2012MetricR4, R6, R12, R14, R28, R29
30685P9200-010685P9200_01:FUSC3215X83NF1, F2, F3
31.2uHInductor_SMD:L_Vishay_IHLP-5050L1, L2, L4
310kResistor_SMD:R_0805_2012MetricR7, R15, R26
3150uFCapacitor_THT:CP_Radial_D12.5mm_P5.00mmC1, C13, C47
31uFCapacitor_SMD:C_0805_2012MetricC3, C15, C45
3200kResistor_SMD:R_0805_2012MetricR3, R11, R30
33.3Resistor_SMD:R_0805_2012MetricR5, R13, R25
3309kResistor_SMD:R_0805_2012MetricR2, R10, R32
34.7uFCapacitor_SMD:C_0805_2012MetricC5, C17, C46
3562kResistor_SMD:R_0805_2012MetricR1, R9, R31
373.2Resistor_SMD:R_0805_2012MetricR8, R16, R27
3SIC431AED-T1-GE3SIC431AED_T1_GE3:REGULATOR_SIC431AED-T1-GE3U1, U2, U4
1Screw_Terminal_01x02REAAAL:TE_1986660-2aJ1
1Screw_Terminal_01x06REAAAL:TEST2J4

More from IllinoisRoboticsInSpace/IRIS_PCB

8
  • 2 layers127 × 127 mmSIC431, the printed circuit board in 3D

    SIC431

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    95 parts2
  • 4 layersPCBPCBNEW, the printed circuit board in 3D

    PCBPCBNEW

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    79 parts2
  • 2 layers50 × 50 mmSabertoothv2, the printed circuit board in 3D

    Sabertoothv2

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    34 parts2
  • 2 layersBms, the printed circuit board in 3D

    Bms

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    28 parts2
  • 2 layers215 × 85 mm12V Power System, the printed circuit board in 3D

    12V Power System

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    24 parts2
  • 2 layers115 × 75 mmArduino Shield, the printed circuit board in 3D

    Arduino Shield

    IllinoisRoboticsInSpace/IRIS_PCB

    Illinios Robotics in Space PCB

    22 parts2

Similar boards

  • 4 layers47 × 28 mmOnBoard, the printed circuit board in 3D

    OnBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    71 parts915
  • 4 layers51 × 21 mmHardware Arctyx Nano, the printed circuit board in 3D

    Hardware Arctyx Nano

    Keyaan-07/Arctyx-Nano

    An open-source FPGA development board in RaspberryPi Pico form factor.

    71 parts124MIT
  • 4 layers30 × 40 mmBldc driver, the printed circuit board in 3D

    Bldc driver

    ZhuYanzhen1/MM32_CLion

    本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.

    71 parts58AGPL-3.0
  • 4 layers51 × 50 mmESC Drivetrain V1, the printed circuit board in 3D

    ESC Drivetrain V1

    mark-belbin/motor-controller

    Custom FOC motor controller designed for underwater robotics.

    71 parts43GPL-3.0
  • 4 layers71 × 100 mmOscar components, the printed circuit board in 3D

    Oscar components

    dchwebb/Oscar

    Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU

    71 parts42Unlicense
  • 4 layers129.2 × 52.8 mmGottaGoFaSDZ3, the printed circuit board in 3D

    GottaGoFaSDZ3

    LIV2/GottaGoFaZt3r

    Zorro III Fast RAM for Amiga 3000/4000

    71 parts37CC-BY-SA-4.0

Questions

What parts does the PCBPCBNEW use?

71 parts, built around the 0685P9200-01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PCBPCBNEW KiCad files?

From the IllinoisRoboticsInSpace/IRIS_PCB repository on GitHub, at the commit this page was made from: the board is boards/PCBPCBNEW2/PCBPCBNEW.kicad_pcb and its schematic boards/12V_Power_System/12V_Power_System.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PCBPCBNEW design in my own project?

Its repository states no licence, so its author keeps all rights: ask IllinoisRoboticsInSpace before reusing the design.