2 layers40 × 34 mm
2 layers101.6 × 53.4 mm
E nose
ilkerya/ML_SensorPCB- Size
- 101.6 × 53.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 138
- Pads
- 242
- Tracks, vias
- 496, 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Feb 2022
- Updated
- 27 Feb 2022
Overview
E nose is an open-source printed circuit board by ilkerya, from the ilkerya/ML_SensorPCB repository on GitHub. It is a 2-layer board of 101.6 × 53.4 mm with 37 parts on 138 nets, routed with 496 tracks and 10 vias.
Its parts include 8 resistors, 2 capacitors, 2 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdML_SensorPCB
Add On PCB for Arduino Mega 256 designed with Kicad, Sensor DataLogger for Enose, Sizes 101.64 mm x 53.35 mm
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13 |
| 8 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 8 | BME688_Module | E-nose:BME688 | MD1, MD2, MD3, MD4, MD5, MD6, MD7, MD8 |
| 1 | |||
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | RTC_DS3231 | E-nose:RTC_DS3231 | U3 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | Temp_si072 | E-nose:Temp_si072 | T1 |
Questions
How big is the E nose PCB?
It measures 101.6 × 53.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E nose use?
37 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E nose KiCad files?
From the ilkerya/ML_SensorPCB repository on GitHub, at the commit this page was made from: the board is E-nose.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the E nose design in my own project?
Its repository states no licence, so its author keeps all rights: ask ilkerya before reusing the design.
Similar boards
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm
BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm
- 2 layers47.8 × 27.4 mm
Vsf stm32h7b0
vsfteam/vsf
Versaloon Software Framework -- a tiny preemptive-capable event-driven incremental software framework for embedded systems
37 parts341Apache-2.0