
Hackholidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

A low profile split keyboard designed for hack club highway!
Atlasleft is an open-source printed circuit board by ila-io, from the ila-io/ATLAS-keyboard repository on GitHub. It is a 2-layer board of 167.9 × 111 mm with 72 parts on 55 nets, routed with 453 tracks and 0 vias.
Its parts include 33 diodes and 33 switches. It belongs with the keyboards and input boards of this library.
The .kicad_sch schematic files are for reference only, the PCB files are not directly pulled from them. They are generated by the config.yaml ergogen file
| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +17 | |
| 33 | PG1350 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +17 | |
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | M2, M2, M2, M2 |
| 1 | ProMicro | MCU1 |
The 71 most common of 72 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


skiselev/micro_8088
Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset



jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 167.9 × 111 mm and has 2 copper layers, 1.6 mm thick.
72 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ila-io/ATLAS-keyboard repository on GitHub, at the commit this page was made from: the board is PCB Files/atlasleft.kicad_pcb and its schematic PCB Files/atlasleft.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ila-io before reusing the design.