
ModuleInterface
ikechangexentrick/euclidean_sequencer
Sequencer producing Euclidean rhythm

Sequencer producing Euclidean rhythm
ModuleCore is an open-source printed circuit board by ikechangexentrick, from the ikechangexentrick/euclidean_sequencer repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.6 × 99.1 mm with 43 parts on 38 nets, routed with 190 tracks and 0 vias.
Its parts include 15 resistors, 9 capacitors, 9 diodes, 4 ICs and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Sequencer producing Euclidean rhythm
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3, R7, R12, R13, R14, R15 |
| 6 | 1N4148 | Diode_THT:D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp | D5, D6, D7, D8, D9, D10 |
| 4 | 0.1u | Attenuverter:C_Axial_L4.8mm_D2.0mm_P2.54mm_Horizontal | C5, C6, C10, C11 |
| 3 | 100p | Attenuverter:C_Axial_L4.8mm_D2.0mm_P2.54mm_Horizontal | C7, C8, C9 |
| 3 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R19, R22, R23 |
| 2 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R18, R21 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R16, R17 |
| 2 | D_Schottky | Diode_THT:D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp | D3, D4 |
| 2 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | e, e |
| 2 | TL074 | Package_DIP:DIP-14_W7.62mm | U3, U4 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25 |
| 1 | 1N4148 | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D13 |
| 1 | 820 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R24 |
| 1 | Conn_Left | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | Conn_Right | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J11 |
| 1 | LM78L05_TO92 | Package_TO_SOT_THT:TO-92_Inline_Wide | U2 |
| 1 | ProMicro | ClockGenerator:Pro_Micro_Top_side_Up | U1 |
| 1 | power_bus | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | reset | Button_Switch_THT:SW_PUSH_6mm | SW1 |

ikechangexentrick/euclidean_sequencer
Sequencer producing Euclidean rhythm

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 35.6 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
43 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ikechangexentrick/euclidean_sequencer repository on GitHub, at the commit this page was made from: the board is hw/ModuleCore.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).