

Kicad soft latch power on
Software latch on-off switch
- Size
- 21.1 × 10.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 8
- Pads
- 28
- Tracks, vias
- 55, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Nov 2021
- Updated
- 12 Dec 2021
Overview
Kicad soft latch power on is an open-source printed circuit board by ikatkov, from the ikatkov/soft-latch-on-off repository on GitHub. It is a 2-layer board of 21.1 × 10.9 mm with 9 parts on 8 nets, routed with 55 tracks and 3 vias.
It is built around the AO3401A. Its parts include 3 resistors, 2 transistors, 2 connectors, 1 capacitor and 1 diode.
Main components
1README
README.mdSoftware latch on-off switch
The button turns on the P-MOSFET when pushed, and also pulls the Arduino GPIO low so button pushes can be detected. The diodes keep the GPIO level and PMOS gate level separate.
To keep the power on after the user releases the button, enable the GPIO's weak pullup, which keeps the N-MOSFET gate high, which keeps the P-MOSFET on. N.B. The N-MOSFET gate pulldown MUST be large compared to the Arduino internal weak pullup, which is max. 50K.
To turn the power off, the Arduino sets the GPIO to Output Low. Power off will be delayed if the user is holding the button down. Holding the button down wont force poweroff if the Arduino is crashed.
Fabrication
See kicad files.
BOM
| Id | Designator | Package | Designation | Value |
|---|---|---|---|---|
| 1 | D1 | SOT-23 | D_Schottky_x2_KCom_AAK | |
| 2 | R3 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 100k | |
| 3 | R2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 1M | |
| 4 | R1 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 330 | |
| 5 | Q1 | SOIC-8_3.9x4.9mm_P1.27mm | SI9942DY | |
| 6 | C1 | C_Disc_D4.7mm_W2.5mm_P5.00mm | 10nF | |
| 7 | J2,J1 | PinHeader_1x03_P2.54mm_Vertical | Conn_01x03 |
PCB
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | D_Schottky_x2_KCom_AAK | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | SI9942DY | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
Similar boards
- 2 layers192.2 × 150.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 6 layers237.9 × 80.5 mm

XG Mobile Dock
osy/XG_Mobile_Station
Open source eGPU dock for ROG Ally and ROG Flow
300 parts712CC-BY-4.0 - 2 layers60 × 111.3 mm

Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.
189 parts589CERN-OHL-S-2.0 - 2 layers89.2 × 82.6 mm

Desktop 50 Pin TopConn
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350
108 parts459GPL-3.0 - 4 layers55 × 55 mm

RBoard
pms67/LittleBrain-STM32F4-Sensorboard
STM32F4-based PCB interfacing with a variety of sensors.
90 parts339 - 6 layers55 × 95 mm

- 4 layers243.8 × 171.5 mm

Questions
How big is the Kicad soft latch power on PCB?
It measures 21.1 × 10.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kicad soft latch power on use?
9 parts, built around the AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad soft latch power on KiCad files?
From the ikatkov/soft-latch-on-off repository on GitHub, at the commit this page was made from: the board is kicad/kicad-soft-latch-power-on.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad soft latch power on design in my own project?
Its repository states no licence, so its author keeps all rights: ask ikatkov before reusing the design.
