4 layers44.7 × 29 mm
Pcb motor prototype 1
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
3 parts915
4 layers
RpiBreakout
ijager/FerrmRidderDe Ferr'me Ridder/Robot
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 7
- Pads
- 49
- Tracks, vias
- 21, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Aug 2019
- Updated
- 2 Sep 2022
Overview
RpiBreakout is an open-source printed circuit board by ijager, from the ijager/FerrmRidder repository on GitHub. It is a 4-layer board with 3 parts on 7 nets, routed with 21 tracks and 0 vias.
README
README.mdFerrmRidder
Requirements
- Raspberry Pi 3 with Raspbian
- VL53L0X distance sensor
- Neopixel LED strip (WS2813)
- USB Audio output device (e.g. usb -> 3.5inch audio converter)
- Raspberry Pi breakout board with connectors for sensors (See Breakout directory)
Installation Instructions
Download New Raspbian headless image and flash sd card
On a Mac:
diskutil unmountdisk /dev/disk2
sudo dd bs=2m if=2019-07-10-raspbian-buster-lite.img of=/dev/rdisk2Boot raspberry pi and configure wifi and enable ssh and I2C
sudo raspi-configUpdates
sudo apt update && sudo apt upgradeInstall pip for python3
sudo apt-get install python3-pipInstall python dependencies, neopixel modules etc
sudo pip3 install rpi_ws281x adafruit-circuitpython-neopixel pygame libsdl-mixer1.2
sudo pip3 install adafruit-circuitpython-vl53l0x
sudo pip3 install adafruit-circuitpython-vl6180xThen we'll follow this Stackexchange answer to enable USB audio.
send audio to pi
tar -czvf audio.tar.gz audio
scp audio.tar.gz pi@ip:~Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Conn_01x03_Female | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
Questions
What parts does the RpiBreakout use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RpiBreakout KiCad files?
From the ijager/FerrmRidder repository on GitHub, at the commit this page was made from: the board is RpiBreakout/RpiBreakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RpiBreakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask ijager before reusing the design.
Similar boards
- 4 layers14.8 × 21 mm
- 4 layers27.3 × 13.2 mm
- 4 layers33.5 × 15 mm
- 4 layers19 × 9 mm
- 4 layers80 × 40 mm
Ground truth
Hongcheng-Gao/EngiWorld
Engiworld: What Can Frontier Agents Deliver in Professional Engineering Environments?
3 parts52MIT - 4 layers22.5 × 10 mm
Transformer
oresat/oresat-live-handheld-ground-station
MCAD, ECAD, software, firmware, build instructions, and everything else you should need for the OreSat Live Handheld Ground Station project.
3 parts20GPL-3.0 - 4 layers6.5 × 7 mm
