Skip to the content
2 layers86 × 54 mmBusiness card rev1, the printed circuit board in 3D

Business card rev1

ihsan-sa/Business-Card

Electronic business card.

Size
86 × 54 mm
Copper layers
2
Thickness
1.6 mm
Parts
37
Nets
32
Pads
106
Tracks, vias
212, 21
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Feb 2025
Updated
21 Apr 2025

Overview

Business card rev1 is an open-source printed circuit board by ihsan-sa, from the ihsan-sa/Business-Card repository on GitHub. It is a 2-layer board of 86 × 54 mm with 37 parts on 32 nets, routed with 212 tracks and 21 vias.

It is built around the STM32L031F6P6, PCM12SMTR and PTS645SM43SMTR92LFS, with the MU00525-32.768K among its other parts. Its parts include 11 resistors, 9 capacitors, 9 diodes, 3 ICs and 2 connectors. It belongs with the STM32 boards of this library.

Main components

4

README

README.md

Business-Card

Parts

37
QtyValueFootprintReferences
8250Resistor_SMD:R_0603_1608MetricR4, R9, R10, R11, R12, R13, R14, R15
8LEDResistor_SMD:R_0603_1608MetricD2, D3, D4, D5, D6, D7, D8, D9
5100nCapacitor_SMD:C_0402_1005MetricC3, C6, C9, C12, C13
210kResistor_SMD:R_0603_1608MetricR1, R5
21uCapacitor_SMD:C_0402_1005MetricC8, C11
24.3pFCapacitor_SMD:C_0402_1005MetricC1, C2
13000keystone3000batholder:3000_KEYB1
175RResistor_SMD:R_0603_1608MetricR3
1Conn_01x03_PinConnector_PinHeader_1.00mm:PinHeader_1x03_P1.00mm_VerticalJ2
1Conn_01x05_PinConnector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_VerticalJ3
1FerriteBead_SmallResistor_SMD:R_0603_1608MetricFB1
1Green LEDLED_SMD:LED_0805_2012MetricD1
1MU00525-32.768KMU00525_32_768K:XTAL_MU00525_NDKX1
1PCM12SMTRK3-1296S-E2:K31296SE2U4
1PTS645SM43SMTR92LFS5mm pushbutton2:SW4_1437565_TECU3
1STM32L031F6P6STM32L031F6P6:TSSOP20U1

Similar boards

  • 2 layers100.5 × 79.9 mmArcane panelized, the printed circuit board in 3D

    Arcane panelized

    cloudglides/ara

    An easy-to-replicate watch built around the STM32.

    90 parts1
  • 4 layers55.1 × 58 mmLINC, the printed circuit board in 3D

    LINC

    noahhusby/LINC

    The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment

    39 parts1CERN-OHL-P-2.0
  • 6 layers85 × 56 mmCansat, the printed circuit board in 3D

    Cansat

    emirhanuluakan/UYDUTEPE

    Flight control system that may use in Model Satellites

    104 partsCERN-OHL-W-2.0
  • 4 layers100 × 80 mmCMFD LMSE, the printed circuit board in 3D

    CMFD LMSE

    IImon1293/CMFD-LMSE

    CAN FDで通信できるGPIO基板

    134 parts
  • 2 layers130.8 × 83.8 mmUMDv2, the printed circuit board in 3D

    UMDv2

    db-electronics/UMDv2-kicad

    Universal Mega Dumper v2 PCB

    112 parts7
  • 2 layers66.6 × 69.3 mmGD32F427RE LTC SMPTE no PHY, the printed circuit board in 3D

    GD32F427RE LTC SMPTE no PHY

    vanvught/KiCad-GD32F427RE-LTC-SMPTE-no-PHY

    KiCad GD32F427RE LTC-SMPTE no PHY

    64 parts2MIT
  • 2 layers77.2 × 59.7 mmGD32FxxxRx no PHY, the printed circuit board in 3D

    GD32FxxxRx no PHY

    vanvught/KiCad-GD32FxxxRx-no-PHY

    GD32F103R GD32F107R GD32F207R GD32F303R GD32F407R development board

    60 parts2MIT
  • 2 layers147.3 × 83.8 mmUMDv3, the printed circuit board in 3D

    UMDv3

    db-electronics/UMDv3-kicad

    UMDv3 Kicad PCB

    68 parts1

Questions

How big is the Business card rev1 PCB?

It measures 86 × 54 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Business card rev1 use?

37 parts, built around the STM32L031F6P6, PCM12SMTR, PTS645SM43SMTR92LFS and MU00525-32.768K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Business card rev1 KiCad files?

From the ihsan-sa/Business-Card repository on GitHub, at the commit this page was made from: the board is business_card_rev1/business_card_rev1.kicad_pcb and its schematic business_card_rev1/UI.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Business card rev1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask ihsan-sa before reusing the design.