Skip to the content
4 layers75.4 × 23.5 mmPcie mini bridge dev, the printed circuit board in 3D

Pcie mini bridge dev

ihartwig/pcie-mini-bridge2

PCIe x1 bridge over USB C cable for hard to reach slots under graphics cards.

Size
75.4 × 23.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
24
Nets
25
Pads
126
Tracks, vias
383, 126
Pours
19
Routed
Yes
KiCad
KiCad 4
Created
24 Nov 2017
Updated
22 Jul 2018

Overview

Pcie mini bridge dev is an open-source printed circuit board by ihartwig, from the ihartwig/pcie-mini-bridge repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 75.4 × 23.5 mm with 24 parts on 25 nets, routed with 383 tracks and 126 vias.

Its parts include 10 resistors, 5 connectors, 3 diodes, 1 capacitor and 1 IC. It belongs with the computers and single-board computers and interfaces and adapters boards of this library.

Parts

24
QtyValueFootprintReferences
51kResistors_SMD:R_0603R1, R2, R4, R8, R10
3Conn_01x02Pin_Headers:Pin_Header_Straight_1x02J1, J3, J4
227kResistors_SMD:R_0603R5, R7
2GreenLEDs:LED_0603D1, D3
2holepcie-mini-bridge-special:hole-m3H1, H2
10Resistors_SMD:R_0603R3
110kResistors_SMD:R_0603R6
116.9kResistors_SMD:R_0603R9
1C_SmallCapacitors_SMD:C_0603C1
1OrangeLEDs:LED_0603D2
1PCIe_x1pcie-mini-bridge-special:PCIe_SMDEdge-NoPaste_TE_5-1734857-xJ5
1TPS2594xxHousings_DFN_QFN:QFN-20-1EP_3x4mm_Pitch0.5mmU1
1USB_C_Receptaclepcie-mini-bridge-special:USB_C_Receptacle_Amphenol_12401610E4-2AJ2

The 22 most common of 24 parts.

More from ihartwig/pcie-mini-bridge

1
  • 4 layers66.2 × 14 mmPcie mini bridge host, the printed circuit board in 3D

    Pcie mini bridge host

    ihartwig/pcie-mini-bridge

    PCIe x1 bridge over USB C cable for hard to reach slots under graphics cards.

    16 parts2CC-BY-SA-4.0

Similar boards

  • 4 layers38 × 38 mmEthersweep, the printed circuit board in 3D

    Ethersweep

    Neumi/ethersweep

    Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

    24 parts587
  • 4 layers192.1 × 126.9 mmStradex1, the printed circuit board in 3D

    Stradex1

    Bylin-code/Stradex1

    STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…

    24 parts101
  • 4 layers87.4 × 19.4 mmXboxUSB C, the printed circuit board in 3D

    XboxUSB C

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    24 parts93
  • 4 layers25 × 36.5 mmMAX M10S Passive, the printed circuit board in 3D

    MAX M10S Passive

    John-owo/pcb-agent-workflow

    用 Claude Code/Codex 搭配 KiCad 10 設計 PCB、交 JLCPCB 製造的工作流程:流程文件、專案範本、JLC 客服溝通 skill、生產稿比對腳本與範例設計

    24 parts76MIT
  • 4 layers35.1 × 25.3 mmDualClockLO, the printed circuit board in 3D

    DualClockLO

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    24 parts66
  • 4 layers14.8 × 38.8 mmPocket knife sense, the printed circuit board in 3D

    Pocket knife sense

    unsurv/NFC_temp

    passive temperature NFC tag

    24 parts49
  • 4 layersTiav3 s13360 3030VE, the printed circuit board in 3D

    Tiav3 s13360 3030VE

    OpenSiPM/sipm-bias-control

    Single channel silicon photomultipliers for high-speed fluorescence imaging

    24 parts44
  • 4 layers65 × 30 mmGimmeGPIO, the printed circuit board in 3D

    GimmeGPIO

    mayermakes/GimmeGPIO

    hardware to add GPIO to any PC running Linux

    24 parts35GPL-3.0

Questions

How big is the Pcie mini bridge dev PCB?

It measures 75.4 × 23.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Pcie mini bridge dev use?

24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcie mini bridge dev KiCad files?

From the ihartwig/pcie-mini-bridge repository on GitHub, at the commit this page was made from: the board is pcb/pcie-mini-bridge-dev.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcie mini bridge dev design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).