Skip to the content
2 layers306.1 × 47 mmTouch sensor horizontal, the printed circuit board in 3D

Touch sensor horizontal

IDMIL/T-Stick6

T-Stick Digital Musical Instrument (DMI)

Size
306.1 × 47 mm
Copper layers
2
Thickness
0.25 mm
Parts
2
Nets
31
Pads
62
Tracks, vias
121, 32
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
6 Feb 2020
Updated
31 Jul 2026

Overview

Touch sensor horizontal is an open-source printed circuit board by IDMIL, from the IDMIL/T-Stick repository on GitHub. It is a 2-layer board of 306.1 × 47 mm with 2 parts on 31 nets, routed with 121 tracks and 32 vias.

Its parts include 1 capacitor and 1 connector. It belongs with the sensors and measurement boards of this library.

README

README.md

T-Stick Digital Musical Instrument (DMI)

The T-Stick is a DMI conceived by Joseph Malloch and D. Andrew Stewart at the Input Devices and Music Interaction Laboratory (IDMIL) at McGill University. It has been in development since 2006, has a relatively long history for a DMI, has multiple versions, several expert performers, and has an associated repertoire. More than 20 copies have been built unintended for commercial use. Nevertheless, it has been adopted by expert performers and composers as part of their musical practice including D. Andrew Stewart (Soprano user) and Fernando Rocha (Tenor user). It has appeared in dozens of public appearances in countries such as Canada, USA, Brazil, Italy, Norway, and Portugal.

This repository hosts up to date firmware for the T-Stick instruments currently at the IDMIL. The T-Stick Documentation data contains technical information as well as guides for how to use the T-Stick 4G/5G.

T-Stick Documentation: https://idmil.github.io/tstick-docs/

Documentation:

T-Stick connection guide for T-Stick 4G/5G

T-Stick firmware upgrade guide

How to build a T-Stick 4G

How to build a T-Stick 5G

OSC sensor data list for T-Stick 4G/5G

Instruments:

As of October 2021, there are over 20 instruments built at IDMIL and in use by several composers and performers:

  • 01 T-Stick Tenor (2G)
  • 06 T-Stick Sopranos (2G, 2GX, 2G-IMU)
  • 01 T-Stick Sopranino (2G)
  • 20+ wireless T-Stick Sopraninos (2G, 2GW, 3G, 4G, 5G)

Project info:

Project webpage at IDMIL: http://www.idmil.org/project/the-t-stick/
T-Stick Documentation: https://idmil.github.io/tstick-docs/
Official repository: https://github.com/IDMIL/TStick

IDMIL - Input Devices and Music Interaction Laboratory - http://www.idmil.org/
CIRMMT - Centre for Interdisciplinary Research in Music Media and Technology - http://www.cirmmt.org/
Schulich School of Music - McGill University

Licensing

The code in this project is licensed under the MIT license.

Parts

2
QtyValueFootprintReferences
1touch-sensortouch-sensors:tstick-sliderJ1
1trill-flex-conectortrill-flex:trill_flexC1

More from IDMIL/T-Stick

1

Similar boards

  • 2 layers37 × 19 mmPassive rpi hub75-adapter, the printed circuit board in 3D

    Passive rpi hub75-adapter

    hzeller/rpi-rgb-led-matrix

    Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

    2 parts4.4kGPL-2.0
  • 2 layersDiode template, the printed circuit board in 3D

    Diode template

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    2 parts547GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 button, the printed circuit board in 3D

    L0 button

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    2 parts546MIT
  • 2 layers35.1 × 46.8 mmSDEX2M2 Breakout Board, the printed circuit board in 3D

    SDEX2M2 Breakout Board

    NVNTLabs/switch2-SDEX2M2

    Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

    2 parts542GPL-3.0
  • 2 layers59.3 × 36.6 mmExpansionBoardTemplate, the printed circuit board in 3D

    ExpansionBoardTemplate

    BlueSCSI/BlueSCSI-v2

    BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

    2 parts459GPL-3.0
  • 2 layersAlpha.9mm.wire, the printed circuit board in 3D

    Alpha.9mm.wire

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    2 parts410
  • 2 layers26.7 × 64 mmGpu power, the printed circuit board in 3D

    Gpu power

    dennisss/dacha

    Monorepo for awesome tools/projects/libraries

    2 parts397Apache-2.0

Questions

How big is the Touch sensor horizontal PCB?

It measures 306.1 × 47 mm and has 2 copper layers, 0.25 mm thick.

What parts does the Touch sensor horizontal use?

2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Touch sensor horizontal KiCad files?

From the IDMIL/T-Stick repository on GitHub, at the commit this page was made from: the board is hardware/PCB/touch-sensor-horizontal/touch-sensor-horizontal.kicad_pcb and its schematic hardware/PCB/touch-sensor-horizontal/touch-sensor-horizontal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Touch sensor horizontal design in my own project?

Its repository states no licence, so its author keeps all rights: ask IDMIL before reusing the design.