
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

A Christmas ornament that 3D prints other Christmas ornaments!
Uv pcb is an open-source printed circuit board by idlehandsdev, from the idlehandsdev/msla_christmas_ornament repository on GitHub. It is a 2-layer board of 28 × 51.9 mm with 32 parts on 20 nets, routed with 188 tracks and 28 vias.
Its parts include 11 capacitors, 9 resistors, 7 diodes, 2 transistors and 2 connectors.
A Christmas ornament that 3D prints other Christmas ornaments!
Check out the video below!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C5, C6, C7, C8, C9, C10, C11 |
| 7 | 200R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7 |
| 7 | uv_led | project_footprints:vlmu3100 | D1, D2, D3, D4, D5, D6, D7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | AP2112K-3.3V | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J2 |
| 1 | Conn_01x12 | 1-1734742-2:TE_1-1734742-2 | J1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 28 × 51.9 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the idlehandsdev/msla_christmas_ornament repository on GitHub, at the commit this page was made from: the board is PCB/LightPCB/uv_pcb/uv_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask idlehandsdev before reusing the design.