2 layers66.9 × 74.5 mm
2 layers128 × 101.3 mm
Spotify PCB
iconner22/spotify_applicationCode and schematics for raspberry pi spotify interface. Integrates physical components with a raspberry pi to control spotify developer playback API.
- Size
- 128 × 101.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 45
- Pads
- 122
- Tracks, vias
- 77, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Dec 2025
- Updated
- 16 Dec 2025
Overview
Spotify PCB is an open-source printed circuit board by iconner22, from the iconner22/spotify_application repository on GitHub. It is a 2-layer board of 128 × 101.3 mm with 20 parts on 45 nets, routed with 77 tracks and 0 vias.
Its parts include 9 switches, 4 resistors, 4 diodes and 1 IC. It belongs with the RP2040 boards of this library.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 1 | 10K POT | Potentiometer_THT:Potentiometer_ACP_CA9-V10_Vertical | RV1 |
| 1 | 16x2 LCD Display | Display:WC1602A | DS1 |
| 1 | Next | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW3 |
| 1 | P1 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW8 |
| 1 | P2 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW5 |
| 1 | P3 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW6 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | Play/Pause | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW9 |
| 1 | Prev | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | RST | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW10 |
| 1 | Set | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW7 |
| 1 | Shuffle | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
Similar boards
- 2 layers86.4 × 64.8 mm
- 2 layers36.2 × 26.8 mm
Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm
Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm
TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k - 2 layers67.6 × 30.5 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
20 parts1kGPL-3.0 - 2 layers44.3 × 28.7 mm
Lin bus adapter esp32
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
20 parts915 - 2 layers89.5 × 61.6 mm
FreeDeck TH 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
20 parts772
Questions
How big is the Spotify PCB PCB?
It measures 128 × 101.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spotify PCB use?
20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spotify PCB KiCad files?
From the iconner22/spotify_application repository on GitHub, at the commit this page was made from: the board is pcbs/Spotify_PCB.kicad_pcb and its schematic pcbs/Spotify_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spotify PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask iconner22 before reusing the design.