
Passive rpi hub75-adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO

Adapter PCB to connect to Rasbperry Pi1 =======================================
Passive rpi hub75-adapter is an open-source printed circuit board by icns-distributed-cloud, from the icns-distributed-cloud/Voucher_SchoolMeal_Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 37 × 19 mm with 2 parts on 14 nets, routed with 128 tracks and 0 vias.
It belongs with the interfaces and adapters boards of this library.
--led-slowdown-gpio if you see
glitches.This board is shared on OSH Park (not affiliated)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Straight_2x08 | Panel-1 |
| 1 | RPi-Header | Pin_Headers:Pin_Header_Straight_2x13 | P1 |

hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

NVNTLabs/switch2-SDEX2M2
Micro SD Express to M.2 NVME Adapter for Nintendo Switch 2

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

It measures 37 × 19 mm and has 2 copper layers, 1.6 mm thick.
2 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the icns-distributed-cloud/Voucher_SchoolMeal_Project repository on GitHub, at the commit this page was made from: the board is LED_Display/adapter/passive-rpi1/passive-rpi-hub75-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).